QUINT-UPS/ 24DC/12DC/5/24DC/10 - Uninterruptible power supply Phoenix Contact

Mã sản phẩm: 2320461

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Uninterruptible power supply with IQ technology for DIN rail mounting, input: 24 V DC, output: 24 V DC/10 A and 12 V DC/5 A, including mounted universal DIN rail adapter UTA 107/30

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

DC operation
Input voltage	24 V DC
Nominal input voltage range	18 V DC ... 30 V DC
Input voltage range	18 V DC ... 30 V DC
Input voltage range DC	18 V DC ... 30 V DC
Voltage type of supply voltage	DC
Buffer period	3 h (With battery module 38 AH)
Current consumption	16 A (maximum, mains operation)
		104 mA (No load, mains operation)
		4 A (Charging, mains operation)
Fixed backup threshold	≤ 22 V DC
Variable connect threshold	1 V/0.1 s
Recommended breaker for input protection	16 A ... 20 A (Characteristic B)

Efficiency	> 98 % (Mains operation, with charged energy storage)
Efficiency		> 93 % (Mains operation, with charged energy storage)
Nominal output voltage	24 V DC
Output voltage range	18 V DC ... 30 V DC (U_OUT = U_IN - 0.5 V DC)
Nominal output current (I_N)	10 A (-25 °C ... 60 °C)
Nominal output current (I_N)		5 A (-25 °C ... 60 °C)
Output current limit	In mains mode according to connected upstream current limiting device
Output current limit		> 15 A (Battery operation)
Bridging time	10800 s
Derating	60 °C ... 70 °C (2.5%/K)
Derating		60 °C ... 70 °C (2.5%/K)
UPS connection in parallel	yes
UPS connection in series	no
Output power	240 W
Total power P_12V + P_24V	max. 360 W
Power dissipation	2.6 W (Mains operation)
		4.6 W (Mains operation)
		2.9 W (Battery operation)
		5.27 W (Battery operation)
Connection in parallel	yes, up to 2 modules with redundancy module
Connection in parallel		2 (Devices)
Connection in series	No
Connection in series		no
Mains operation
Nominal output voltage	12 V DC
Nominal output voltage		24 V DC
Output voltage range	18 V DC ... 30 V DC (U_OUT = U_IN - 0.5 V DC)
Nominal output current (I_N)	5 A (-25 °C ... 60 °C)
Nominal output current (I_N)		10 A (-25 °C ... 60 °C)
POWER BOOST (I_Boost)	7.5 A (-25 °C ... 40 °C)
POWER BOOST (I_Boost)		15 A (-25 °C ... 40 °C)
Selective Fuse Breaking (I_SFB)	60 A (-25 °C ... 60 °C)
Duration	12 ms (SFB technology)
Battery operation
Nominal output voltage	12 V DC
Nominal output voltage		24 V DC
Output voltage range	19.2 V DC ... 27.6 V DC (U_OUT = U_BAT - 0,5 V DC)
Nominal output current (I_N)	5 A (-25 °C ... 60 °C)
Nominal output current (I_N)		10 A (-25 °C ... 60 °C)
POWER BOOST (I_Boost)	7.5 A (-25 °C ... 40 °C)
POWER BOOST (I_Boost)		15 A (-25 °C ... 40 °C)
Selective Fuse Breaking (I_SFB)	65 A (-25 °C ... 60 °C)
Duration	15 ms (SFB technology)
Signal: Alarm
Output description	Relay (floating)
Maximum switching voltage	≤ 30 V AC/DC
Continuous load current	≤ 100 mA
Signal: Battery charge
Output description	Relay (floating)
Maximum switching voltage	≤ 30 V AC/DC
Output voltage	24 V
Continuous load current	≤ 100 mA
Signal: Battery mode
Output description	Relay (floating)
Maximum switching voltage	≤ 30 V AC/DC
Output voltage	24 V
Continuous load current	≤ 100 mA
Signal: POWER BOOST
Output voltage	24 V DC
Continuous load current	100 mA

Nominal voltage U_N	24 V DC
End-of-charge voltage	24 V DC ... 29 V DC (temperature compensated)
Charging current	0.2 A ... 2.88 A
Nominal capacity range	1.3 Ah ... 140 Ah
Battery presence check/time interval	1 min.
Battery presence check (cyclic)	60 s
Energy storage device connection in parallel	yes, 15 (observe line protection)
Energy storage device connection in series	no
IQ technology	Yes
Temperature compensation	42 mV/K (preset)
Temperature compensation (preset)	42 mV/K
Network management	Yes

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	16
Conductor cross section AWG max.	12
Stripping length	7 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	16
Conductor cross section AWG max.	12
Stripping length	7 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Stripping length	7 mm
Screw thread	M4
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Interface

IFS (Interface system data port)

Types of signaling	LED
		Relay contact
		Interface/software
Signal output
Signalization designation	Power In OK
Status display	LED
Note on status display	Static to
Note on status display		Static to
Signal output: Switching output
Signalization designation	Alarm
Status display	LED
Note on status display	Static to
Color	red
Note on status display	Static to
Signal output: Switching output
Signalization designation	Battery charge
Status display	LED bar graph
Note on status display	dynamic
Color	red/green
Note on status display	dynamic
Signal output: Switching output
Signalization designation	Battery mode
Status display	LED
Note on status display	Static to
Color	yellow
Note on status display	Static to
Signal output: Transistor output, active
Signalization designation	POWER BOOST

Insulation voltage input/output	500 V DC
Insulation voltage input, output / housing	750 V DC

Product type	DC UPS
Product family	QUINT USV
IQ technology	Yes
MTBF (IEC 61709, SN 29500)	> 652000 h (40 °C)
Insulation characteristics
Protection class	III
Life expectancy (electrolytic capacitors)
Time	33941 h

Width	35 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	5 mm / 5 mm
Installation distance top/bottom	50 mm / 50 mm
Alternative assembly
Width	123 mm
Height	130 mm
Depth	39 mm

Mounting type	DIN rail mounting
Assembly instructions	alignable: horizontal 5 mm, vertical 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715

Color	aluminium
Housing material	Metal
Type of housing	Aluminum (AlMg3)
Hood version	Galvanized sheet steel, free from chrome (VI)
Housing material	Steel sheet, zinc-plated

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
Vibration (operation)		15 Hz ... 150 Hz, 2.3g t_v= 90 min.

Rail applications	EN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard - Electrical safety	EN 60950-1/VDE 0805 (SELV)

UL approvals	UL Listed UL 508
UL approvals		UL/C-UL Recognized UL 60950-1

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m
Frequency range	1 GHz ... 2 GHz
Test field strength	10 V/m
Frequency range	2 GHz ... 3 GHz
Test field strength	3 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 2 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 2 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Emitted interference
Standards/regulations	EN 61000-6-3
Radio interference voltage in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.