Q 1,5/4A50/24-M20KU-ESA-ASI BK - Panel feed-through Phoenix Contact

Mã sản phẩm: 1437274

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Panel feed-through with QUICKON fast connection technology, for accommodating one or two AS-i flat-ribbon conductors, on the rear side with four 0.5 m long individual wires 1.5 mm2

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Panel feed-through
Number of positions	4
Number of connections per position	1
Locking type	Screw locking
Coding	no
Thread type	M20
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection technology
Connection technology	QUICKON connection
Connection system, internal	Individual wires 50 cm long; 1.5 mm²
Frequency of connections between conductors of the same cross section	10
Conductor connection
Conductor cross section flexibel	0.75 mm² ... 1.5 mm²
Conductor cross section solid	0.75 mm² ... 1.5 mm²
Connection cross section AWG	18 ... 16
Wrench size, union nut	19 mm
Tightening torque, union nut	3 Nm
Wrench size, contact carrier	24 mm
Tightening torque contact carrier	4.5 Nm
Tightening torque, counter nut	4.5 Nm
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 \| BN
		2 \| WH
		3 \| BU
		4 \| BK

Dimensional drawing
Width	24 mm
Height	24 mm
Length	55.9 mm
Diameter	24 mm
Wrench size, union nut	19 mm

Rated surge voltage (II/2)	6 kV
Rated surge voltage (III/2)	6 kV
Rated surge voltage (III/3)	6 kV
Rated current	15 A
rated voltage (II/2)	1000 V
rated voltage (III/2)	1000 V
Rated voltage (III/3)	500 V (with insulating sleeve PT/FS 4,8. Without insulating sleeve 250 V AC.)
Nominal voltage U_N	500 V AC
Nominal voltage U_N		500 V DC
Nominal current I_N	15 A

Color Housing	black
Material Housing	PA
Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Pre-nickel plated and tin-plated
Contact carrier material	PA

Cable length	0.5 m
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter	VDE 0295 class 1 to 6/min. 0.15 mm
Wire diameter including insulation	1.8 mm ... 3 mm
Material wire insulation	PVC/PE/TPE/rubber

Mounting type	Front mounting M20
Assembly instructions	If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load.
Connection method	QUICKON fast connection

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67
Ambient temperature (operation)	-25 °C ... 80 °C
Temperature when conductor connected	-5 °C ... 50 °C