Q 1,5/2L180/11KU-DSI - Panel feed-through Phoenix Contact

Mã sản phẩm: 1670277

Panel feed-through, for internal wall mounting, with dip-solder connection, length of the solder pin: 3.8 mm, hole Ø 2-pos. = 19.0 mm - 0.3

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Product type	Panel feed-through
Number of positions	2
Position marking	1, 2
Number of connections per position	1
Locking type	Screw locking
Shielded	no
Thread type	Pg11
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection technology
Connection technology	QUICKON connection
Connection system, internal	Dip-solder connection The product must be screwed to the PCB before soldering. Self-tapping screws in acc. with ISO 1481-ST 2,9 x 6,5 C.
Conductor connection
Conductor cross section flexibel	0.75 mm² ... 1.5 mm²
Conductor cross section solid	0.75 mm² ... 1 mm²
Connection cross section AWG	18 ... 16
Wrench size, union nut	22 mm
Tightening torque, union nut	2.5 Nm
Wrench size, contact carrier	22 mm
Tightening torque contact carrier	3.75 Nm
Tightening torque, counter nut	3.75 Nm

Color	green
Material Housing	PA
Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Pre-nickel plated and tin-plated
Contact carrier material	PA 6.6

Wire diameter including insulation	>= 3 mm
Position marking	1, 2
Wire insulation material	PVC / PE

Mounting type	Front mounting Pg11
Assembly instructions	If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load.
Connection method	Dip-solder connection

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67
Ambient temperature (operation)	-25 °C ... 80 °C
Ambient temperature (operation)		-25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.)
Temperature when conductor connected	-5 °C ... 50 °C