PWT 35-800AC-FM - Lightning/surge arrester type 1/2 Phoenix Contact

Mã sản phẩm: 2800419

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Lightning/surge arrester, according to type 1/2 / class I/II, for 1-phase power supply networks with combined PE and N installed in one conductor (L1, PEN).

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	Assembling: Two 8 mm screws with 8 Nm on an isolated or grounded surface
		Long-wave surge current 2 ms in accordance with IEC 60099-4: 250 x 1.0 kA; 500 x 0.5 kA.

IEC test classification	I / II
IEC test classification		T1 / T2
EN type	T1 / T2
IEC power supply system	TN-C
IEC power supply system		IT
Type	Installation module
Product type	Arrester combination
Product family	POWERTRAB
Number of positions	1
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	8 kV: IV (600 V), III (1000 V)
Pollution degree	3

Nominal frequency f_N	50 Hz (60 Hz)
Nominal voltage U_N	690 V AC
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	2x N/C contacts, 1-pos.
Operating voltage	30 V AC
Operating voltage		30 V DC
Operating current	1.5 A AC
Operating current		1.5 A DC
Supply: Status indicator/remote signaling
Operating voltage	19.2 V AC/DC ... 30 V AC/DC
Operating current	7 mA AC/DC ... 13 mA AC/DC
Rated current	10 mA AC/DC
Max. required back-up fuse	1 A (e.g. T to IEC 127-2/III)
Immunity to interference according to IEC 61000-4-5 (line-line)	1 kV
Immunity to interference according to IEC 61000-4-5 (line-earth)	6 kV

Double terminal point
Connection method	Screw connection
Screw thread	M6
Tightening torque	8.5 Nm
Stripping length	24 mm
Conductor cross section flexible	16 mm² ... 50 mm²
Conductor cross section rigid	16 mm² ... 50 mm²
Conductor cross section AWG	6 ... 1/0
PE conductor connection
Connection method	Ring cable lug
Tightening torque	20 Nm
Conductor cross section flexible	16 mm² ... 95 mm²
Conductor cross section rigid	16 mm² ... 95 mm²
Conductor cross section AWG	6 ... 3/0
Remote fault indicator contact
Screw thread	M3
Tightening torque	0.55 Nm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Dimensional drawing
Width	56 mm
Height	191 mm
Depth	280 mm
Horizontal pitch	3 Div.

Color	silver grey
Flammability rating according to UL 94	V-2
CTI value of material	600
CTI value of material		250
Insulating material	PA/PC
Material group	I (PA 6.6/PC)
Material group		IIIa (PA 4.6)
Housing surface material	die-cast aluminum
Housing material	Die-cast aluminum, salt water resistant

Mechanical data
Open side panel	No

Mode of protection	L-PE
Direction of action	1L-PEN
Nominal voltage U_N	690 V AC
		554/960 V AC (TN-C)
		690 V AC (IT)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous operating voltage U_C (L-PE)	800 V AC
Rated load current I_L	150 A (Serial through wiring with 50 mm²)
Residual current I_PE	≤ 20 µA
Standby power consumption P_C	≤ 16 mVA
Nominal discharge current I_n (8/20) µs (L-PE)	35 kA
Maximum discharge current I_max (8/20) µs (L-PE)	100 kA
Impulse discharge current (10/350) µs (L-PE), charge	17.5 As
Impulse discharge current (10/350) µs (L-PE), specific energy	305 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value I_imp	35 kA
Follow current interrupt rating I_fi (L-PE)	50 kA
Short-circuit current rating I_SCCR	50 kA
Voltage protection level U_p (L-PE)	≤ 4.5 kV
Residual voltage U_res (L-PE)	≤ 2.7 kV (at I_n)
		≤ 2.5 kV (at 20 kA)
		≤ 2.3 kV (at 10 kA)
		≤ 2.2 kV (at 5 kA)
		≤ 2.1 kV (at 3 kA)
TOV behavior at U_T (L-PE)	1960 V AC (200 ms / withstand mode)
TOV behavior at U_T (L-PE)		1500 V AC (5 s / withstand mode)
Response time t_A (L-PE)	≤ 100 ns
Max. backup fuse with V-type through wiring	125 A (gG at ≥35 mm²)
Max. backup fuse with branch wiring	400 A (gG at 2x 50 mm²)
Max. backup fuse with branch wiring		800 A (aR (only up to I_imp = 25 kA))

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (operation)		-40 °C ... 55 °C (serial through wiring ≥ 35 mm²)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 4000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 150 Hz / 2.5 h / X, Y, Z)
Vibration (operation)		4g (5 ... 100 Hz / X, Y, Z - according to GL )

UL specifications
Maximum continuous operating voltage MCOV (L-G)	800 V AC
Nominal discharge current I_n (L-G)	20 kA
Mode of protection	L-G
Nominal voltage	690 V AC
Power distribution system	Single phase
Nominal frequency	60 Hz
Measured limiting voltage MLV (L-G)	4370 V
SPD Type	4CA
UL indicator/remote signaling
AC operating voltage	30 V AC
DC operating voltage	30 V DC
AC operating current	1.5 A AC
DC operating current	1.5 A DC
UL connection data Double terminal point
Tightening torque	75 lb_f-in.
Conductor cross section AWG	1/0 ... 6
UL connection data PE conductor connection
Tightening torque	175 lb_f-in.
Conductor cross section AWG	3/0