PT 4X1- 5DC-ST - Surge protection plug Phoenix Contact

Mã sản phẩm: 2838306

Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 5 V DC

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

IEC test classification	C1
		C2
		C3
		D1
VDE requirement class	C1
		C2
		C3
		D1
Type	Male
Product type	Surge protection for MCR technology
Product family	PLUGTRAB PT
Surge protection fault message	none
Arrester can be tested with CHECKMASTER from software version:	From SW rev. 1.00
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal voltage U_N

5 V DC

Connection method	Screw connection (in connection with the base element)
Screw thread	M3
Tightening torque	0.8 Nm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
Housing material	PA 6.6

Mechanical data
Open side panel	No

Direction of action	Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage U_C	6 V DC
Maximum continuous voltage U_C		4 V AC
Rated current	300 mA (45 °C)
Operating effective current I_C at U_C	≤ 1 mA
Residual current I_PE	≤ 1 µA (with PT 4X1+F-BE)
Residual current I_PE		≤ 4 mA (Directly grounded)
Nominal discharge surge current I_n (8/20) µs (Core-Earth)	10 kA
Pulse discharge current I_imp (10/350) µs	2.5 kA (per path)
Total discharge current I_total (8/20) µs	20 kA
Max. discharge current I_max (8/20) µs maximum (line-earth)	10 kA
Nominal pulse current Ian (10/1000) µs (line-earth)	125 A
Output voltage limitation at 1 kV/µs (line-earth) spike	≤ 14 V
Output voltage limitation at 1 kV/µs (line-earth) static	≤ 10 V
Residual voltage at I_n (conductor-ground)	≤ 10 V
Voltage protection level U_p (line-earth)	≤ 50 V (C2 - 10 kV / 5 kA)
Response time t_A (line-earth)	≤ 1 ns
Input attenuation aE, asym.	0.5 dB (≤ 200 kHz)
Cut-off frequency fg (3 dB), asym. (PE) in 50 Ω system	typ. 1 MHz
Capacity (Core-Earth)	6 nF
Resistance per path	4.7 Ω
Surge protection fault message	none
Max. required back-up fuse	315 mA (T)
Impulse durability (line-earth)	C2 - 10 kV / 5 kA
Impulse durability (line-earth)		D1 - 2.5 kA

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C

VDE requirement class	C1
		C2
		C3
		D1
Air clearances and creepage distances
Standards/regulations	VDE 0110-1 / IEC 60664-1
Standards Information technology specification
Standards/regulations	IEC 61643-21
Standards/regulations		IEC 61643-21
Standards/specifications	IEC 61643-21