PT 2X2-12DC-ST - Surge protection plug Phoenix Contact

Mã sản phẩm: 2838254

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

PT protective connector with protective circuit for two 2-wire floating signal circuits. 12 V DC nominal voltage. HART-compatible.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	C1
		C2
		C3
		D1
Type	Male
Product type	Surge protection for MCR technology
Product family	PLUGTRAB PT
Surge protection fault message	none
Arrester can be tested with CHECKMASTER from software version:	From SW rev. 1.00
Wire pairs per module	2
Insulation characteristics
Overvoltage category	III

Nominal voltage U_N

12 V DC

Connection method	Screw connection (in connection with the base element)
Screw thread	M3
Tightening torque	0.8 Nm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12

Dimensional drawing
Width	17.5 mm
Height	44.8 mm
Depth	51.7 mm
Horizontal pitch	1 Div.
Complete module width	17.7 mm
Complete module height	90 mm
Complete module depth	65.5 mm

Color	black
Flammability rating according to UL 94	V-0
Housing material	PA 6.6

Mechanical data
Open side panel	No

Direction of action	Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage U_C	13 V DC
Maximum continuous voltage U_C		9 V AC
Rated current	450 mA (45 °C)
Operating effective current I_C at U_C	≤ 5 µA
Residual current I_PE	≤ 1 µA (with PT 2X2+F-BE)
Residual current I_PE		≤ 4 µA
Nominal discharge current I_n (8/20) µs (line-line)	10 kA
Nominal discharge surge current I_n (8/20) µs (Core-Earth)	10 kA
Pulse discharge current I_imp (10/350) µs	2.5 kA (per path)
Total discharge current I_total (8/20) µs	20 kA
Max. discharge current I_max (8/20) µs maximum (line-line)	10 kA
Max. discharge current I_max (8/20) µs maximum (line-earth)	10 kA
Output voltage limitation at 1 kV/µs (line-line) spike	≤ 20 V
Output voltage limitation at 1 kV/µs (line-earth) spike	≤ 450 V
Output voltage limitation at 1 kV/µs (line-line) static	≤ 18 V
Output voltage limitation (10/700) µs (line-earth)	≤ 450 V
Output voltage limitation (10/700) µs (line-signalground)	≤ 18 V
Residual voltage at I_n (conductor-conductor)	≤ 18 V
Residual voltage at I_n (line-signalground)	≤ 450 V
Residual voltage with Ian (10/1000) µs (line-line)	≤ 23 V
Response time t_A (line-line)	≤ 1 ns
Response time t_A (line-earth)	≤ 100 ns
Input attenuation aE, sym.	0.5 dB (≤ 600 kHz)
Cut-off frequency fg (3 dB), sym. in 50 Ω system	typ. 3 MHz
Capacity (Core-Core)	3 nF
Resistance per path	2.2 Ω
Surge protection fault message	none
Impulse durability (line-line)	C2 - 10 kV / 5 kA
Impulse durability (line-earth)	C2 - 10 kV / 5 kA
Impulse durability (line-earth)		D1 - 2.5 kA

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C

Air clearances and creepage distances
Standards/regulations	VDE 0110-1 / IEC 60664-1
Standards Information technology specification
Standards/regulations	IEC 61643-21
		DIN EN 61643-21
		UL 497B
		IEC 61643-21
		DIN EN 61643-21
		UL 497B