PT 1X2-48DC-ST - Surge protection plug Phoenix Contact

Mã sản phẩm: 2803658

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Protective plug PT with protective circuit for a 2-wire floating signal circuit.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	Technical data is valid in association with the following specified base elements:
		PT 1X2+F-BE 2856126
		PT 1X2-BE 2856113

IEC test classification	C1
		C2
		C3
		D1
Type	Male
Product type	Surge protection for MCR technology
Product family	PLUGTRAB PT
Number of positions	2
Surge protection fault message	none
Arrester can be tested with CHECKMASTER from software version:	From SW rev. 3.15
Wire pairs per module	1
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal voltage U_N

48 V DC

Connection method	Screw connection (in connection with the base element)
Screw thread	M3
Tightening torque	0.5 Nm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12

Dimensional drawing
Width	17.7 mm
Height	45 mm
Depth	52 mm
Horizontal pitch	1 Div.
Complete module width	17.7 mm
Complete module height	90 mm
Complete module depth	65.5 mm

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
Housing material	PA 6.6

Mechanical data
Open side panel	No

Direction of action	Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage U_C	53 V DC
Maximum continuous voltage U_C		37 V AC
Rated current	450 mA (45 °C)
Operating effective current I_C at U_C	≤ 5 µA
Residual current I_PE	≤ 2 µA (with PT 1X2-BE)
Residual current I_PE		≤ 1 µA (with PT 1X2+F-BE)
Nominal discharge current I_n (8/20) µs (line-line)	10 kA
Nominal discharge surge current I_n (8/20) µs (Core-Earth)	10 kA
Pulse discharge current I_imp (10/350) µs	2.5 kA
Total discharge current I_total (8/20) µs	20 kA
Max. discharge current I_max (8/20) µs maximum (line-line)	10 kA
Max. discharge current I_max (8/20) µs maximum (line-earth)	20 kA (in total)
Nominal pulse current Ian (10/1000) µs (line-line)	18 A
Output voltage limitation at 1 kV/µs (line-line) spike	≤ 70 V
Output voltage limitation at 1 kV/µs (line-earth) spike	≤ 450 V (with PT 1X2-BE)
Output voltage limitation at 1 kV/µs (line-earth) spike		≤ 1 kV (with PT 1X2+F-BE)
Output voltage limitation at 1 kV/µs (line-line) static	≤ 70 V
Output voltage limitation at 1 kV/µs (line-earth) static	≤ 25 V (with PT 1X2-BE)
Output voltage limitation at 1 kV/µs (line-earth) static		≤ 50 V (with PT 1X2+F-BE)
Voltage protection level U_p (line-line)	≤ 80 V (C1 - 1 kV / 500 A)
		≤ 85 V (C2 - 2 kV/1 kA)
		≤ 120 V (C2 - 10 kV / 5 kA)
Voltage protection level U_p (line-earth)	≤ 450 V (C1 - 1 kV / 500 A with PT 1X2-BE)
		≤ 550 V (C2 - 2 kV / 1 kA with PT 1X2-BE)
		≤ 600 V (C2 - 10 kV / 5 kA with PT 1X2-BE)
		≤ 800 V (C1 - 1 kV / 500 A with PT 1x2+F-BE)
		≤ 900 V (C2 - 2 kV / 1 kA with PT 1x2+F-BE)
		≤ 1000 V (C2 - 10 kV / 5 kA with PT 1X2+F-BE)
Response time t_A (line-line)	≤ 1 ns
Response time t_A (line-earth)	≤ 100 ns
Input attenuation aE, sym.	typ. 0.5 dB (≤ 2 MHz / 50 Ω)
Input attenuation aE, sym.		typ. 0.2 dB (≤ 600 kHz / 150 Ω)
Cut-off frequency fg (3 dB), sym. in 50 Ω system	typ. 10 MHz
Cut-off frequency fg (3 dB), sym. in 150 Ω system	typ. 3.5 MHz
Capacity (Core-Core)	typ. 1 nF
Capacity (Core-Earth)	typ. 4 pF (with PT 1X2-BE)
Capacity (Core-Earth)		typ. 2 pF (with PT 1X2+F-BE)
Resistance per path	2.2 Ω ±10 %
Surge protection fault message	none
Max. required back-up fuse	500 mA (T)
Impulse durability (line-line)	C1 - 1 kV / 500 A
		C2 - 2 kV / 1 kA
		C2 - 10 kV / 5 kA
Impulse durability (line-earth)	C1 - 1 kV / 500 A
		C2 - 2 kV / 1 kA
		C2 - 10 kV / 5 kA
		D1 - 2.5 kA

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m (amsl)