PSR-SPP-42-230UC/URM4/4NO/2NC - Extension module Phoenix Contact

Mã sản phẩm: 2702925

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

1- or 2-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4, PL e in accordance with EN ISO 13849, plug-in Push-in terminal block, width: 22.5 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRclassic
Application	Extension module
Mechanical service life	10x 10⁶ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typ. starting time with U_s	< 100 ms (with Us / when controlled via A1)
Typical release time	< 20 ms (Control via A1 at 42 V DC)
Typical release time		< 200 ms (Control via A1 at 230 V AC)
Recovery time	< 1 s

Maximum power dissipation for nominal condition	16.1 W (At I_L² = 72 A², P_Total max = 1.7 W + 14.4 W)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage/insulation
Supply
Rated control circuit supply voltage U_S	42 V AC/DC -15 % / +10 %
Rated control circuit supply voltage U_S		230 V AC/DC -15 % / +10 %
Rated control supply current I_S	typ. 35 mA (At 42 V DC)
Rated control supply current I_S		typ. 15 mA (@ 230 V AC)
Power consumption at U_S	1.5 W (with DC)
Power consumption at U_S		1.7 W (with AC)
Apparent power	max. 3.5 VA (at U_S)
Inrush current	< 38 A (Δt = 50 µs at U_s)
Protective circuit	Surge protection; Suppressor diode and varistors

Relay: Enabling current paths (13/14, 23/24, 33/34, 43/44)
Output description	2 N/O contacts in series, safety-related, floating
Number of outputs	4
Contact type	4 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 8 A
Switching capacity in accordance with IEC 60947-5-1	5 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		6 A (DC13)
Limiting continuous current	6 A (observe derating)
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Output fuse	6 A gL/gG (High demand)
Output fuse		4 A gL/gG (Low demand)
Relay: Diagnostics contact (51/52)
Output description	2 N/O contacts in series, floating
Number of outputs	1
Contact type	1 confirmation current path
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	1 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		1 A (DC13)
Limiting continuous current	1 A (see to derating)
Sq. Total current	1 A² (see to derating)
Switching frequency	max. 0.5 Hz
Output fuse	1 A (gL / gG)
Relay: Signaling current path (61/62)
Output description	2 N/C contacts in parallel, floating
Number of outputs	1
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		250 V AC
Switching capacity	min. 50 mW
Inrush current	max. 6 A
Switching capacity in accordance with IEC 60947-5-1	5 A (AC15)
Switching capacity in accordance with IEC 60947-5-1		6 A (DC13)
Limiting continuous current	6 A (observe derating)
Sq. Total current	36 A² (observe derating)
Switching frequency	max. 0.5 Hz
Output fuse	1 A (gL/gG)

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

Width	22.5 mm
Height	112 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (In conjunction with suitable evaluating device)
Performance level (PL)	e (In conjunction with suitable evaluating device)
Safety data: IEC 61508 - High demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9 (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3 (In conjunction with suitable evaluating device)
Probability of a hazardous failure on demand (PFD_AVG)	1.48 x 10^-4
Proof test interval	78 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g