PSR-SCP- 24DC/ESP4/2X1/1X2 - Safety relays Phoenix Contact

Mã sản phẩm: 2981020

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safety relay for SIL 3 high- and low-demand applications, also approved in accordance with EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, plug-in screw terminal blocks, width: 22.5 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRclassic
Application	Emergency stop
		Process technology
		Safety door
Mechanical service life	approx. 10⁷ cycles
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

Maximum power dissipation for nominal condition	15.9 W (I² = 72 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated surge voltage/insulation	6 kV / Safe isolation, increased insulation
Rated surge voltage/insulation		Basic insulation 4 kV between all current paths and housing

General
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 %
Power consumption at U_S	1.2 W
Rated control supply current I_S	typ. 50 mA DC
Inrush current	1 A (Δt <10 ms at U_s)
Filter time	max. 3 ms (Test pulse duration)
Typical response time	60 ms (Automatic/manual start)
Typical release time	20 ms
Recovery time	approx. 1 s
Protective circuit	Surge protection; Suppressor diode, 33 V (A1 - A2, Y2 - A2)
Protective circuit		Reverse polarity protection
Operating voltage display	Green LED
Status display	Green LED

Contact type	2 enabling current paths
Contact type		1 signaling current path
Contact material	AgSnO₂, gold-flashed
Maximum switching voltage	250 V AC/DC (Observe the load curve)
Minimum switching voltage	10 V
Limiting continuous current	6 A (N/O contact/N/C contact, high demand)
Limiting continuous current		4 A (N/O contact, for low-demand applications)
Maximum inrush current	6 A
Inrush current, minimum	10 mA
Sq. Total current	72 A² (observe derating)
Interrupting rating (ohmic load) max.	144 W (24 V DC, τ = 0 ms)
		200 W (48 V DC, τ = 0 ms)
		77 W (110 V DC, τ = 0 ms)
		70 W (220 V DC, τ = 0 ms)
		1500 VA (250 V AC, τ = 0 ms)
Switching capacity min.	0.2 W
Switching capacity (360/h cycles)	5 A (24 V (DC13))
Switching capacity (360/h cycles)		5 A (230 V (AC 15))
Switching capacity (3600/h cycles)	5 A (24 V (DC13))
Switching capacity (3600/h cycles)		5 A (230 V (AC 15))
Output fuse	6 A gL/gG NEOZED (High demand)
		4 A gL/gG NEOZED (Low demand)
		Also applies to applications in accordance with EN 50156-1.

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3

Width	22.5 mm
Height	99 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	1.16 x 10^-10
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	3
Probability of a hazardous failure on demand (PFD_AVG)	1.24 x 10^-4
Proof test interval	72 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g