PSR-MC37-3NO-1NC-24DC-SC - Safety relays Phoenix Contact

Mã sản phẩm: 2702411

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Safety relay for emergency switching off and safety doors as well as for elevator applications up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, plug-in screw terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Safety relays
Product family	PSRmini
Application	Emergency stop
		Safety door
		Solenoid switch
		Transponder
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typical response time	< 100 ms (automatic start)
Typ. starting time with U_s	< 100 ms (when controlled via A1)
Typical release time	< 20 ms (when controlled via A1 or S12)
Restart time	< 1 s (Boot time)
Recovery time	< 500 ms

Maximum power dissipation for nominal condition	16.65 W (at U_S = 30 V, I_L² = 72 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated insulation voltage		250 V AC
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths
Rated surge voltage/insulation		Basic insulation 4 kV between all current paths and housing
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 30 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 %
Rated control supply current I_S	typ. 70 mA
Power consumption at U_S	typ. 1.68 W
Inrush current	2 A (Δt = 300 µs at U_s)
Protective circuit	Surge protection; Suppressor diode
Protective circuit		Protection against polarity reversal for rated control circuit supply voltage

Digital: Sensor circuit (S12, S22)
Description of the input	safety-related sensor inputs
Input voltage range "0" signal	0 V DC ... 5 V DC (for safe Off; at S12 and S22)
Input current range "0" signal	0 mA ... 2 mA (for safe Off; at S12 and S22)
Inrush current	< 5 mA (Δt = 500 µs, for Us/Ix at S12)
Inrush current		> -5 mA (Δt = 500 µs, for Us/Ix at S22)
Filter time	max. 3 ms (at S12, S22; test pulse width; blanking pulses/dark test)
		1 s (at S12, S22; test pulse rate; blanking pulses/dark test)
		Where test pulse width ≤ 1 ms: test pulse rate = 5 x test pulse width
		max. 1 ms (at S12, S22; test pulse width; switch-on pulses/light test)
		100 ms (at S12, S22; test pulse rate; switch-on pulses/light test)
		Unless switch-on pulses/light tests are safety-related, they should be disabled.
Max. permissible overall conductor resistance	150 Ω
Current consumption	< 4 mA (with U_s/I_xto S12/S22)
Digital: Start circuit (S35)
Description of the input	non-safety-related
Number of inputs	1
Input voltage range "1" signal	19.2 V DC ... 30 V DC
Inrush current	< 10 mA (Δt = 500 µs)
Max. permissible overall conductor resistance	150 Ω
Protective circuit	Suppressor diode
Current consumption	< 0.5 mA

Relay: Enabling current path (13/14, 23/24, 33/34)
Output description	safety-related N/O contacts
Number of outputs	3 (undelayed)
Contact type	3 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC/DC (Observe the load curve)
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	5 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-1		5 A (250 V (AC15))
Limiting continuous current	6 A (observe derating)
Sq. Total current	72 A² (observe derating)
Switching frequency	0.5 Hz
Mechanical service life	10x 10⁶ cycles
Interrupting rating (ohmic load) max.	1500 VA (250 V AC, τ = 0 ms)
Interrupting rating (ohmic load) max.		For additional values, see load curve
Maximum interrupting rating (inductive load)	48 W (24 V DC, τ = 40 ms)
		40 W (48 V DC, τ = 40 ms)
		36 W (60 V DC, τ = 40 ms)
		35 W (110 V DC, τ = 40 ms)
		33 W (220 V DC, τ = 40 ms)
		1500 VA (250 V AC, τ = 40 ms)
Output fuse	6 A gL/gG (N/O contact)
Relay: Signaling current path (41/42)
Output description	non-safety-related N/C contact
Number of outputs	1 (undelayed)
Contact type	1 signaling current path
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC/DC
Switching capacity	min. 50 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A (Δt = 100 ms)
Limiting continuous current	1 A
Sq. Total current	1 A²
Switching frequency	0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	1 A gL/gG
Signal: Y32
Output description	non-safety-related
Number of outputs	1 (digital)
Voltage	23 V DC (U_s - 1 V)
Current	max. 100 mA
Maximum inrush current	1 A (Δt = 5 ms at U_s)
Short-circuit protection	Yes

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3

Status display	3 x green LED
Operating voltage display	1 x green LED

Width	22.5 mm
Height	112.2 mm
Depth	114.5 mm

Housing material

Polyamide

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Safety data: IEC 61508 - High demand
Equipment type	Type A
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9 (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3
Probability of a hazardous failure on demand (PFD_AVG)	1.34 x 10^-4
Proof test interval	56 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-40 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g for Δt = 11 ms (continuous shock: 10g for Δt = 16 ms)
Vibration (operation)	10 Hz ... 150 Hz, 2g