PP-RJ-IDC - Patch panels Phoenix Contact

Mã sản phẩm: 2703019

Patch panel, RJ45 jack on IDC terminal blocks, 10/100/1000 Mbps, DIN rail adapter, IP20, shield contacting with strain relief

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Patch panel
MTTF	105699 Years
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Rated insulation voltage

85 V DC (In accordance with EN/IEC 60079-7, Annex H)

Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed	10/100/1000 Mbps
Frequency range	250 MHz
Connection method	IDC connection
Pin assignment	1:1
Transmission length	100 m (including patch cables)
Conductor cross section flexible max.	0.34 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section, rigid max.	0.34 mm²
Conductor cross section, rigid min.	0.14 mm²
Max. AWG conductor cross section, flexible	22
Min. AWG conductor cross section, flexible	26
Single-wire/terminal point, rigid AWG max.	22
Single-wire/terminal point, rigid AWG min.	26
Wire diameter incl. insulation	1.6 mm (Terminal block is tested with PVC insulation - other insulation materials available on request)
Frequency of connections between conductors of the same cross section	10
Transmission medium	Copper
Output nominal voltage	< 57 V DC
Maximum output power	60 W
Maximum output current	725 mA (Per channel)
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Connection method	RJ45 jack

Material Housing	Plastic
Flammability rating according to UL 94	V0

External cable diameter

5.5 mm ... 6.5 mm

Ambient conditions
Degree of protection	IP20 (Manufacturer's declaration)
Ambient temperature (operation)	-40 °C ... 75 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Altitude		≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec IIC Gc
Certificate	PxCIF18ATEX2703015U
Note	Please follow the special installation instructions in the documentation!
UKEX
Identification	 II 3 G Ex ec IIC Gc
Certificate	PxCIMA22UKEX2703015U
UL, USA
Certificate	UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, Canada
Certificate	CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A
Shipbuilding
Identification	DNV GL
DNV GL data
Temperature	D
Humidity	B
Vibration	B
EMC	B