PACT RCP-4000A-1A-D190-3M-UV - Current transformer Phoenix Contact

Mã sản phẩm: 1033485

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

Set consisting of one 1 A measuring transducer and one UV-resistant Rogowski coil with signal line. Length of Rogowski coil: 600 mm, diameter: 190 mm. Length of signal line: 3 m. The Rogowski coil measures the AC current of busbars and power lines.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Current transformer
Insulation characteristics
Insulation	double insulation
Insulation characteristics
Insulation	double insulation
Overvoltage category	III (1000 V, to neutral conductor)
Overvoltage category		IV (600 V, to neutral conductor)
Pollution degree	2

Typical measuring error	< 1 %
Temperature coefficients	0.005 %/K (+10 °C ... +70 °C, both components have the same ambient temperature)
Temperature coefficients		0.07 %/K (-20 °C ... +10 °C, both components have the same ambient temperature)
Measuring coil
Length of measuring coil	600 mm
Diameter of measuring coil	8.3 mm ±0.2 mm
Length of signal cable	3 m
Conductor structure signal line	2x 0.22 mm (Signal (tinned))
Conductor structure signal line		1x 0.22 mm (Shielding (tinned))
Insulation	double insulation
Rated insulation voltage	1000 V AC (rms CAT III)
Rated insulation voltage		600 V AC (rms CAT IV)
Test voltage	10.45 kV (DC / 1 min.)
Basic accuracy	<± 0.21 %
Measuring transducers
Linearity error	< 0.5 % (From the range end value)
Maximum transmission error	≤ 0.5 % (From the range end value)
Frequency range	45 Hz ... 65 Hz
Max. detectable harmonics	< 2 kHz
Current consumption	< 190 mA (at 19.2 V)
Test voltage	1.5 kV AC (Supply/input and output: 50 Hz, 1 min)
General
Can be calibrated	no
Class	1
Accuracy class	1
Converter type	UV-resistant Rogowski coil and 1 A measuring transducer
Supply: Measuring transducers
Nominal supply voltage	24 V DC -20 % ... +25 %
Nominal supply voltage range	19.2 V DC ... 30 V DC
Max. current consumption	190 mA
Power consumption	4 W

Frequency
Designation	Measuring coil
Frequency measuring range	40 Hz ... 20000 Hz
Position error	< 1 %
Linearity error	0.1 %
Signal
Input signal (at 50 Hz)	100 mV (1000 A)
Curve type	Sine
Input impedance	27 kΩ (smallest measuring range)
Current transformers
Configurable/programmable	Via DIP switches
Rated power	1.5 VA
Primary rated current I_pn	0 A AC ... 100 A AC
		0 A AC ... 250 A AC
		0 A AC ... 400 A AC
		0 A AC ... 630 A AC
		0 A AC ... 1000 A AC
		0 A AC ... 1500 A AC
		0 A AC ... 2000 A AC
		0 A AC ... 4000 A AC
Phase angle	< 1 °
Can be calibrated	no
Class	1
Accuracy class	1
Converter type	UV-resistant Rogowski coil and 1 A measuring transducer

Signal
Designation	Measuring coil
Output signal (at 50 Hz)	100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)	V_OUT = M * dI/dt
Output voltage (sinusoidal, in no-load operation)	100 mV (V_OUT = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))
Accuracy class	< 1
Signal
Designation	Measuring transducer
Current output signal	0 A AC ... 1 A AC
Load	0 Ω ... 1.5 Ω
Max. distances for copper cables at P_{N max}	32 m (0.75 mm² (AWG 20))
		64 m (1.5 mm² (AWG 16))
		107 m (2.5 mm² (AWG 14))

Measuring transducer side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm

Operating voltage display

Green LED

Measuring coil
Length	600 mm
Diameter	8.3 mm ±0.2 mm
Measuring coil when installed
Diameter	190 mm
Signal line
Length	3 m

Coil material	Elastollan
Housing material	PC
Housing material		Polyamide

Ambient conditions
Measuring coil degree of protection	IP67 (not assessed by UL)
Measuring transducer degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 80 °C (Measuring coil)
Ambient temperature (operation)		-20 °C ... 70 °C (Measuring transducer)
Ambient temperature (storage/transport)	-40 °C ... 80 °C (Measuring coil)
Ambient temperature (storage/transport)		-25 °C ... 85 °C (Measuring transducer)
Altitude	< 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)