NEARFI P 2A R - Inductive coupler Phoenix Contact

Mã sản phẩm: 1234229

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

NearFi, remote coupler for contactless power transmission in the centimeter range, 24 V DC, 2 A, M12 connection technology, IP65 type of protection. A base coupler is required for operation.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Inductive coupler
Application	Power
MTTF	331 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		196 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		98 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Overvoltage category	II
Pollution degree	1

Supply
Protective circuit	Short-circuit/overload protection
Connection method	M12 female (A-coded)

Supply
Connection method	M12 female (A-coded)

Inductive: Power transmission
Switch-on time	< 50 ms
Range	min. 0 mm
		typ. 10 mm (at 60 °C)
		typ. 12 mm (at 25 °C)
Wireless modules that can be connected	1 (Base coupler)
Frequency range	100 kHz ... 148.5 kHz (Power transmission)

Dimensional drawing
Width	80 mm
Height	86 mm
Depth	39 mm

Material Housing	PBT
Material Housing		Die-cast zinc
Flammability rating according to UL 94	V0
Impact strength	IK06

Other resistance

Resistant to welding splashes

Ambient conditions
Degree of protection	IP65
Impact strength	IK06
Ambient temperature (operation)	-20 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	2000 m
Permissible humidity (operation)	10 % ... 95 %
Permissible humidity (storage/transport)	10 % ... 95 %
Air pressure (operation)	80 kPa ... 108 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (up to 3500 m above sea level)

CE
Certificate	CE-compliant
Wireless approval, Europe
Note	RED 2014/53/EU
KC approval for South Korea
Certificate	R-R-PCK-1234232

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 55032 Class A, industrial applications
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 4 kV (Test Level 2)
Discharge in air	± 8 kV (Test Level 3)
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz (Test Level 3)
Field intensity	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV (Test Level 3 - asymmetrical)
Output	± 2 kV (Test Level 3 - asymmetrical)
Signal	± 2 kV (Test Level 3 - asymmetrical)
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Input	± 0.5 kV (Test Level 1 - symmetrical)
Input		± 1 kV (Test Level 2 - asymmetrical)
Output	± 1 kV (Test Level 2 - asymmetrical)
Signal	± 1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz (Test Level 3 - asymmetrical)
Comments	Criterion A
Voltage	10 V (80% amplitude modulation with 1 kHz)
Emitted interference
Standards/regulations	EN 55016-2-3
Comments	Class A, industrial applications
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Free from substances that could impair the application of coating	Yes
Other resistance	Resistant to welding splashes
Standards/regulations	EN 60204-1 (PELV)
Standard designation	Protective extra-low voltage