LUMGATE 277 2DOR/1AO DALI - Interface Phoenix Contact

Mã sản phẩm: 1274016

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Luminaire control unit for controlling LED drivers, 110 V ... 277 V input voltage, 2 relay outputs, 8 A load current, up to 8 LED drivers can be controlled, 10 V analog interface, DALI interface, measurement of load currents

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	124 mm
Height	79 mm
Depth	30 mm

Remote bus
Transmission speed	500 kBaud
DALI
No. of channels	1
Fieldbus: DALI
Designation	DALI
Output current	28 mA (guaranteed, max. 14 DALI devices)
Output current		max. 40 mA
Type of protection	Overload protection

Module
ID code (dec.)	51
ID code (hex)	33
Input address area	16 bit
Output address area	16 bit

Analog
Output name	Analog voltage output
Number of outputs	1
D/A converter resolution	8 bit
Current output signal	max. -20 mA (Current sink)
Voltage output signal	1 V ... 10 V
Permissible cable length	max. 0.5 m
Digital
Output name	Relay output
Number of outputs	2
Output voltage	250 V AC (Soft start function to reduce the inrush current of the LED drivers, not suitable for inductive loads)
Output current	max. 8 A (max. 5 A per relay, resistive load for applications with UL/CSA approval)
Nominal output voltage	max. 277 V AC (50 Hz ... 60 Hz)

Type	Stand-Alone
Product type	I/O component
Diagnostics messages	Bus error in INTERBUS
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Supply:
Designation	Device supply
Supply voltage	max. 250 V AC (Class II / EN 61347)
Supply voltage range	110 V AC ... 277 V AC -13 % ... +6 %
Current consumption	max. 8 A (with active consumers)

Connection technology
Connection name	Supply
Note on the connection method	Use copper wire, that is approved up to 85°C.
Conductor connection
Connection method	Push-in spring connection
Conductor cross section rigid	0.34 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	10 mm
Supply
Connection method	Push-in spring connection
Note on the connection method	Use copper wire, that is approved up to 85°C.
Conductor cross section, rigid	0.34 mm² ... 4 mm²
Conductor cross section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	10 mm
INTERBUS
Connection method	Push-in spring connection
Note on the connection method	pluggable
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	10 mm
DALI and analog output
Connection method	Push-in spring connection
Note on the connection method	pluggable
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	10 mm
Relay output
Connection method	Push-in spring connection
Conductor cross section, rigid	0.34 mm² ... 4 mm²
Conductor cross section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	10 mm

Ambient conditions
Ambient temperature (operation)	-40 °C ... 65 °C
Degree of protection	IP20 (touch-proof (per manufacturer's declaration))
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 hPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (up to 45°C in accordance with EN 60068-2-78:2013)
Permissible humidity (storage/transport)	5 % ... 90 % (according to DIN EN 61131-2, non-condensing, no ice formation)