IPCH-4X-PCL-TCP-24DC-UT - Pulse measuring device Phoenix Contact

Mã sản phẩm: 1045379

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Evaluation unit for the recording of surge currents and transient overvoltages over external sensor cables. Communication of the measured data to PROFICLOUD via Ethernet. The data evaluated in the cloud can be accessed on the device via Modbus/TCP or RESTful web service.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	The product was successfully tested in an extended temperature range of -35 °C … +85 °C. When using in the extended temperature range, note the information in the module-specific user manual.
		The ImpulseCheck module is designed to be operated in a control cabinet in conjunction with surge protective devices (SPDs) that are used in power supply systems with nominal alternating or nominal DC voltages of no more than 600 V AC or 600 V DC between the conductor and neutral conductor. These maximum nominal voltage values refer to environments of overvoltage category IV and pollution degree 2 at a maximum installation altitude of 2,000 m above sea level.
		NOTE: Electrical damage due to overload. Provide external protection for the 24 V area. To ensure reliable tripping in the event of an error, the power supply unit must be able to supply the tripping current of the external overcurrent protection.

Type	DIN rail module, one-piece
Product type	Evaluation unit
Product family	IMPULSECHECK
Insulation characteristics
Pollution degree	2

IoT capability: PROFICLOUD
IoT platform	PROFICLOUD
Supports cloud computing	yes
Protocol / IP-Port	MQTT / 8883
Protocol / IP-Port		HTTPS / 443
Smart Services	ImpulseAnalytics

Current consumption	≤ 2 W
Evaluation unit
Operating voltage	24 V DC (-15 % ... +20 % including all tolerances and ripple)
Operating current	≤ 70 mA
Detectable values (current strength)	100 A ... 40 kA
Maximum measuring period	1 s
Sampling rate	500 kHz
Evaluation unit Ethernet ports
Interface	Ethernet
Number	1
Connection method	RJ45
Note on the connection method	pluggable
Transmission speed	10/100 Mbps
Evaluation unit Function
Basic functions	Acquisition of sensor data
Operation	via Proficloud application and web interface

24 V supply
Connection method	Screw terminal block
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 14
Note	The DIN rail connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715.
Sensors
Connection method	Screw terminal block
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section rigid	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	26 ... 14

Dimensional drawing
Width	22.5 mm
Height	104.7 mm
Depth	114.5 mm
Horizontal pitch	1.3 Div.

Color	traffic grey A RAL 7042
Housing material	Polyamide

Mechanical data
Open side panel	No

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C (I_max= 4 A)
Ambient temperature (operation)		-35 °C ... 85 °C (I_max= 2 A)
Ambient temperature (storage/transport)	-35 °C ... 85 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	30 % ... 95 % (non-condensing)
Shock (operation)	30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27)
Vibration (operation)	5g (Bump endurance test in accordance with EN 60068-2-6)

UL approval
Identification	UL 61010-1:2012, 3rd Ed., Revised Nov. 21 2018
		CSA C22.2 No. 61010-1-12, 3rd Ed., Revised Nov. 21 2018
		IEC 61010-2-030:2017

Conformance with EMC directives	Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electrostatic discharge (ESD)EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electromagnetic fieldsEN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Fast transients (burst)EN 61000-4-4/IEC 61000-4-4 Criterion A, 2.2 kV
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Transient overvoltage (surge)EN 61000-4-5/IEC 61000-4-5 Criterion B; DC supply lines: ±0.5 kV/±1 kV (symmetrical/asymmetrical), fieldbus cable shielding: ±1 kV
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Conducted interferenceEN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
		Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Noise emission EN 61000-6-3/IEC 61000-6-3 Class B
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU