INJ 2111-T - Injector Phoenix Contact

Mã sản phẩm: 2703013

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

PoE injector, 60 W, RJ45 jack on screw terminal blocks, 10/100/1000 Mbps, DIN rail mounting, IP20, potential separation, shield contacting with strain relief, shield current monitoring, surge protection

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	30.2 mm
Height	130 mm
Depth	120 mm

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Material Housing	Plastic
Flammability rating according to UL 94	V0

Mounting type	DIN rail mounting
Mounting position	vertical

Basic functions	PSE/Midspan, compliant with IEEE 802.3af, at
Data: Power over Ethernet
Serial transmission speed	10/100/1000 Mbps
Frequency range	125 MHz
Connection method	Screw connection
No. of channels	1
Tightening torque	0.22 Nm ... 0.25 Nm
Pin assignment	1:1
Transmission length	100 m (including patch cables)
Conductor cross section flexible max.	1.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section, rigid min.	0.14 mm²
Max. AWG conductor cross section, flexible	16
Min. AWG conductor cross section, flexible	28
Single-wire/terminal point, rigid AWG max.	16
Single-wire/terminal point, rigid AWG min.	28
Stripping length	5 mm
Output nominal voltage	54 V DC (PoE)
Output power	60 W
Maximum output power	75 W (UL)
Data: Ethernet
Connection method	RJ45 jack

IEC test classification	C2
Product type	Injector
MTTF	1797 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		733 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		283 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Electrical isolation	VCC // SCM + FE // PoE
Test voltage data interface/power supply	1.5 kV AC (50 Hz, 1 min.)
Supply
Supply voltage range	18 V DC ... 57 V DC
Nominal supply voltage	24 V DC (SELV/PELV, restrictions for ATEX applications)
Nominal supply voltage		48 V DC
Max. current consumption	4.2 A
		2.73 A (24 V DC, Ex areas in accordance with UL-HazLoc)
		1.34 A (48 V DC, Ex areas in accordance with UL-HazLoc)
Power consumption	≤ 75 W
Protective circuit	Reverse polarity protection
Connection method	Screw connection
Function
Designation	Shield current monitoring
Switch-on threshold	≥ 30 mA
Local diagnostics	Yellow LED
Precision	± 5 %
Response time	3 s
Current	≤ 2 A
Power consumption	270 mW (Shield current monitoring)

Supply
Connection method	Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section, flexible	0.20 mm² ... 2.50 mm²
Conductor cross section, rigid	0.20 mm² ... 2.50 mm²
Conductor cross section AWG	20 ... 12

Ambient conditions
Degree of protection	IP20 (Manufacturer's declaration)
Ambient temperature (operation)	-40 °C ... 75 °C (for derating, see technical documentation)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Altitude		≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Air pressure (operation)	80 kPa ... 110 kPa (ATEX approval)

Standards/regulations

IEC 61643-21

CE
Certificate	CE-compliant
ATEX
Identification	 II 3G Ex ec nC IIC T4 Gc
Certificate	PxCIF19ATEX2703014X
Note	Please follow the special installation instructions in the documentation!
UL, USA/Canada
Identification	Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
		Class I, Div. 2, Groups A, B, C, D
UL, USA
Certificate	UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, Canada
Certificate	CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A
Power over Ethernet
Identification	IEEE 802.3af
		IEEE 802.3at

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
		FCC Part 15B Class A
		CISPR 22
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV (Test Level 3)
Discharge in air	± 8 kV (Test Level 3)
Indirect discharge	± 6 kV
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 3 GHz (Test Level 3)
Field intensity	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2.2 kV (1 minute)
Signal	± 2.2 kV (1 minute)
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Input	± 0.5 kV
Signal	± 1 kV (Data line, asymmetrical)
Signal		± 2 kV (I/O cable on field side only, asymmetric)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Emitted interference
Standards/regulations	EN 61000-6-4
Comments	Class A, industrial applications
Emitted interference
Standards/regulations	EN 61000-6-3
Comments	Class B, domain of use: residential and small commercial