IB IL SGI 2/F-PAC - Analog module Phoenix Contact

Mã sản phẩm: 2878638

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Inline analog strain gauge input terminal, complete with accessories (connector and marking field), 2 fast inputs, 4-, 6-conductor connection technology

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	48.8 mm
Height	136 mm
Depth	71.5 mm

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Color

green

Inline local bus
Number of interfaces	2
Connection method	Inline data jumper
Transmission speed	500 kbps
Transmission physics	Copper

Module
ID code (dec.)	223
ID code (hex)	DF
Length code (hex)	03
Length code (dec)	03
Process data channel	48 bit
Input address area	6 Byte
Output address area	6 Byte
Register length	64 bit
Required parameter data	15 Byte
Required configuration data	5 Byte

Analog
Description of the input	Input channels for strain gauge
Number of inputs	2
Connection technology	6 or 4-wire, twisted pair shielded cable
Bridge difference U_d	Measuring range specified by selecting the characteristic and the bridge voltage
Bridge voltage U₀	3.3 V
Bridge voltage U₀		5 V
Measured value representation	15 bit + sign bit
Characteristics	±1 mV/V, ±2 mV/V, ±3 mV/V, ±4 mV/V
Characteristics		+1 mV/V, +2 mV/V, +3 mV/V, +4 mV/V

Analog
Output description	Voltage output
Number of outputs	2
Impedance	> 58.3 Ω (typical; permissible total resistance of the strain gauge)
Output voltage	5 V
Output voltage		3.3 V
Output current	typ. 55 mA (with U_V = 3.3 V)
Output current		typ. 85 mA (with U_V = 5 V)

Type	modular
Product type	I/O component
Product family	Inline
Operating mode	Process data operation with 3 words, PCP with 1 word
Diagnostics messages	Failure of the power supply at U_ANA Error message in the process data
		Failure of or insufficient communications power U_L I/O error message sent to the bus coupler
		I/O error Error message in the process data

Maximum power dissipation for nominal condition	0.59 W
Potentials
Power consumption	typ. 0.76 W (Device in nominal operation)
Potentials: Communications power (U_L)
Supply voltage	7.5 V DC (via voltage jumper)
Current draw	max. 85 mA
Current draw		typ. 75 mA
Potentials: Supply of analog modules (U_ANA)
Supply voltage	24 V DC (via voltage jumper)
Supply voltage range	19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw	typ. 32 mA (with maximum load of 58.3 Ω when U_V = 5 V)
Current draw		typ. 8 mA (without strain gauge)

Connection technology
Connection name	Inline connector
Conductor connection
Connection method	Spring-cage connection
Conductor cross section rigid	0.08 mm² ... 1.5 mm²
Conductor cross section flexible	0.08 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16
Stripping length	8 mm
Inline connector
Connection method	Spring-cage connection
Conductor cross section, rigid	0.08 mm² ... 1.5 mm²
Conductor cross section, flexible	0.08 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16
Stripping length	8 mm

Ambient conditions
Ambient temperature (operation)	-25 °C ... 55 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)