HC-STA-B24PT-BWSC-LT-M32-ELCAL - Connector set Phoenix Contact

Mã sản phẩm: 1416351

Connector set, number of positions: 24, connection method: Push-in connection, connection cross section: AWG 26- 14

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Type	B24
Product type	Connector set
Number of positions	24
Connection profile	24+PE
Application	Standard
No. of cable outlets	1
Housing type	Complete housing
Seal present	yes
Protective cover	yes
Locking type	Single locking latch
Series	HC-B
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection method	Push-in connection
Connection technology	Push-in connection
Conductor cross section	0.14 mm² ... 2.5 mm² (with ferrule)
Conductor cross section		0.14 mm² ... 2.5 mm² (with ferrule)
Connection cross section AWG	26 ... 14
Stripping length	8 mm ... 10 mm

Dimensional drawing
Width	53 mm
Height	90.5 mm
Length	140.5 mm
Drill hole distance, horizontal	130 mm
Drill hole distance, vertical	32 mm
Hole diameter	4.5 mm
Installation dimensions
Width of the assembly cutout	35 mm
Length of the assembly cutout	113 mm

Material Housing	Die-cast aluminum, saltwater-resistant
Material Protective cover	PA
Flammability rating according to UL 94	V0
Seal material Profile gasket	NBR
Seal material Flat gasket	NBR
Contact material	Copper alloy
Contact surface material	Ag
Contact carrier material	PC
Locking latch material	PA
Impact strength	IK08

External cable diameter	15 mm ... 21 mm
External cable diameter		17 mm ... 21 mm (for UL 514 B)

Mechanical data
Locking type	Latch
Insertion/withdrawal cycles	≥ 500

Ambient conditions
Degree of protection	IP66
Degree of protection		IP67
Impact strength	IK08
Ambient temperature (operation)	-40 °C ... 100 °C

Mounting type	Screw mounting
Assembly instructions	Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles.
Assembly instructions		Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule.
Connection method	Push-in connection