HC-M-DSUB 09-UT-F - Contact insert module Phoenix Contact

Mã sản phẩm: 1417307

Contact insert module, number of positions: 9, type : D-SUB 9, Socket, Screw connection, 48 V, 1 A, 0.08 mm2 ... 0.5 mm2, application: Data

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	For HEAVYCON housing type B6 to B48, HC-M-B...MF-... module carrier frame required
General	Connectors may be operated only when there is no load/voltage.
General	The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment.

Assembly instructions	To ensure correct use, installation in housing with IP54 protection or better is required
Connection method	Screw connection

Product type	Modular contact insert
Number of positions	9
Connection profile	9
Contact numbering	1 - 9
Application	Data
Number of module slots	1
Type	D-SUB 9
Contact type	turned
Series	HC-M-DSUB-U
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection technology
Connection technology	Screw connection
Clamping range of the strain relief clip	4.00 mm ... 7.00 mm
Conductor connection
Conductor cross section	0.08 mm² ... 0.5 mm²
Connection cross section AWG	28 ... 20
Tightening torque	0.03 Nm ... 0.05 Nm
Stripping length of the individual wire	4.2 mm

Dimensional drawing
Width	34.2 mm
Height	35.7 mm
Length	14.6 mm
Clamping range of the strain relief clip	4.00 mm ... 7.00 mm
Mechanical characteristics
Minimum housing height	72 mm
Contact diameter	1 mm

Mechanical data
Insertion/withdrawal cycles	≥ 500

Color	light grey
Material Line conductor	Zinc alloy
Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag
Contact carrier material	PC
Standards/regulations	PC: Fire protection in rail vehicles - requirement set R22 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
Standards/regulations		PC: Fire protection in rail vehicles - requirement set R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C

Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement set R22 acc. to DIN EN 45545-2 (Risk level HL1 - HL2)
		PC: Fire protection in rail vehicles - requirement set R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)