HC-M-04-KT-M - Contact insert module Phoenix Contact

Mã sản phẩm: 1417371

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

Contact insert module, number of positions: 4xKOAX, power contacts: 0, control contacts: 4, Pin, Soldering and crimp connection, 48 V, 2 A, 0.2 mm2 ... 0.8 mm2, application: Signal

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	For HEAVYCON housings type B6 to B48, HC-M-B…MF-... module carrier frame required, crimp contacts HC-M-04-KOAX... (crimp contacts not included in the scope of delivery)
General	Connectors may be operated only when there is no load/voltage.
General	It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment.

Product type	Coaxial insert, modular
Number of positions	4
Connection profile	4xKOAX
Contact numbering	1 - 4
Application	Signal
Number of module slots	1
No. of power contacts	0
No. of control contacts	4
Contact type	turned
Series	HC-M-04-KOAX
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated voltage (III/3)	48 V
Rated surge voltage	0.8 kV
Rated current	1.5 A
Contact resistance, phase conductor	≤ 3 mΩ
Contact resistance, inner conductor	≤ 10 mΩ
Insulation resistance	≥ 10 GΩ

Connection technology
Connection technology	Soldering and crimp connection
Conductor connection
Conductor cross section	0.2 mm² ... 0.8 mm²
Connection cross section AWG	24 ... 18
Stripping length of the individual wire	2.5 mm ±0.5 mm

Dimensional drawing
Width	34.2 mm
Height	31.5 mm
Length	14.6 mm
Mechanical characteristics
Contact diameter	4.8 mm

Color	light grey
Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Au
Contact carrier material	PC
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Stripping length of the individual wire

2.5 mm ±0.5 mm

Mechanical data
Insertion/withdrawal cycles	≥ 500

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C

Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Assembly instructions	To ensure correct use, installation in housing with IP54 protection or better is required
Assembly instructions		For HC-M-04-BU-KOAX... contacts