HC-D 40-A-UT-PEL-M - Terminal adapter Phoenix Contact

Mã sản phẩm: 1584240

HEAVYCON terminal adapter male insert, D40 series, 40-pos., right PE connection for the left side of the control cabinet, screw connection

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B16 type
General	Connectors may be operated only when there is no load/voltage.

Type	B16
Product type	Terminal adapter
Number of positions	40
Connection profile	40+PE
Type	for the left side of the control cabinet
Series	HC-D
Screwdriver blade	0.5 x 3.5 mm
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Connection technology
Connection technology	Screw connection
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	0.5 mm² ... 2.5 mm²
Connection cross section AWG	22 ... 12
Tightening torque	0.5 Nm ... 0.8 Nm
Stripping length of the individual wire	10 mm

Dimensional drawing
Width	34 mm
Height	129.9 mm
Length	83 mm
Drill hole distance, horizontal	77.5 mm
Drill hole distance, vertical	27 mm

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag
Contact carrier material	PA
Standards/regulations	PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Stripping length of the individual wire

10 mm

Mechanical data
Insertion/withdrawal cycles	≥ 500

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C

Constructional and testing regulations	DIN EN 61984
		DIN EN 60664
		IEC 60352
Tests	DIN EN 61984
		DIN EN 60664
		IEC 60352
Testing
Standards/regulations	PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Assembly instructions	To ensure correct use, installation in housing with IP54 protection or better is required
		Not for HC-EVO panel mounting bases
		Connectors may be plugged in only when there is no load/voltage. Not for HC-B 16-AMQ-EMV housings