HC-D 15-I-CT-M - Contact insert Phoenix Contact

Mã sản phẩm: 1584376

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

Contact insert, number of positions: 15+PE, size: D15, number of connections per position: 1, Pin, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	For HC-D15 housing, crimp contacts CK1,6-ED (crimp contacts not included in scope of supply)
General	Connectors may be operated only when there is no load/voltage.
General	It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment.

Assembly instructions

To ensure correct use, installation in housing with IP54 protection or better is required

Type	D15
Product type	Contact insert with a fixed no. of positions
Number of positions	15
Note number of positions	15+PE
Connection profile	15+PE
Number of connections per position	1
Contact type	turned
Contact type		rolled
Series	HC-D
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Width	22.5 mm
Height	34.2 mm
Length	55.4 mm
Drill hole distance, horizontal	49.5 mm
Drill hole distance, vertical	16 mm
Mechanical characteristics
Contact diameter	1.6 mm

Connection technology
Connection technology	Crimp connection
Number of connections per position	1
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	0.14 mm² ... 2.5 mm²
Connection cross section AWG	26 ... 14
Tightening torque	0.7 Nm ... 1 Nm (PE connection)
Tightening torque		0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Stripping length of the individual wire	8 mm (0.14 mm² ... 1.5 mm²)
Stripping length of the individual wire		6 mm (2.5 mm²)

Rated voltage (III/3)	250 V
Rated surge voltage	4 kV
Rated current	10 A
SCCR	5 kA (UL 2237)

Mechanical data
Insertion/withdrawal cycles	≥ 500

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag (alternatively Au)
Contact carrier material	PC
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C (including heating up of contacts)

Constructional and testing regulations	DIN VDE 0627/86
		DIN VDE 0110/02.79
		DIN VDE 0110-1/04.97
		IEC 60664-1, DIN IEC 60512
		IEC 60352
Tests	DIN VDE 0627/86
		DIN VDE 0110/02.79
		DIN VDE 0110-1/04.97
		IEC 60664-1, DIN IEC 60512
		IEC 60352
Testing
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)