HC-COM-Q4/2-I-CT-F - Contact insert Phoenix Contact

Mã sản phẩm: 1079556

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

Contact insert, number of positions: 4+2+PE, size: COM, power contacts: 4, control contacts: 2, number of connections per position: 1, Socket, Crimp connection, 400 V, 40 A, 1.5 mm2 ... 6 mm2, application: Power/signal

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Connectors may be operated only when there is no load/voltage.
General	For crimp contacts CK4.0-ED.. (control circuit), CK1.6-ED... (control circuit)

Assembly instructions

To ensure correct use, installation in housing with IP54 protection or better is required

Type	COM
Product type	Contact insert with a fixed no. of positions
Number of positions	6
Connection profile	4+2+PE
Contact numbering	1 - 4 (power contacts)
Contact numbering		11 - 12 (control contacts)
Application	Power/signal
Number of connections per position	1
No. of power contacts	4
No. of control contacts	2
Contact type	turned
Series	HC-COM
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Width	22.4 mm
Height	44.1 mm
Length	41.6 mm
Mechanical characteristics
Contact diameter	4 mm

Connection technology
Connection technology	Crimp connection (power contacts)
		Crimp connection (control contacts)
		Crimp connection (PE contact)
Number of connections per position	1
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	1.5 mm² ... 6 mm² (power contacts)
Conductor cross section		0.14 mm² ... 2.5 mm² (control contacts)
Connection cross section AWG	16 ... 10 (power contacts)
Connection cross section AWG		26 ... 14 (control contacts)
Stripping length of the individual wire	9 mm (for 1.5 ... 2.5 mm²)
		9.6 mm (Power 4 ... 6 mm²)
		8 mm (Control circuit)
		6 mm (Signal 2.5 mm²)

Rated voltage (III/3)	400 V (Phase-ground power contacts)
		250 V (control contacts)
		690 V (Phase-phase power contacts)
Rated voltage for power contacts	400/690 V
Rated voltage for power contacts		250
Rated surge voltage	6 kV (Phase-phase power contacts)
Rated surge voltage		4 kV (control contacts)
Rated current	40 A (power contacts)
Rated current		10 A (control contacts)

Mechanical data
Insertion/withdrawal cycles	≥ 500

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag (alternatively Au)
Contact carrier material	PC
Material of contact surface, power contact	Ag
Material of contact surface, control contact	Ag (alternatively Au)
Standards/regulations	PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)