HC-B 24-A-UT-PER-M - Terminal adapter Phoenix Contact

Mã sản phẩm: 1648108

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

HEAVYCON terminal adapter male insert, B24 series, 24-pos., left protective conductor connection for the right side of the control cabinet, screw connection.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type
General	Connectors may be operated only when there is no load/voltage.

Type	B24
Product type	Terminal adapter
Number of positions	24
Connection profile	24+PE
Contact numbering	1 - 24
Type	for the right side of the control cabinet
Series	HC-B
Screwdriver blade	0.5 x 3.5 mm
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated voltage (III/3)	500 V
Rated surge voltage	6 kV
Rated current	16 A
SCCR	5 kA (UL 2237)

Connection technology
Connection technology	Screw connection
Connection in acc. with standard	IEC / EN
Conductor connection
Conductor cross section	0.5 mm² ... 2.5 mm²
Connection cross section AWG	20 ... 14
Tightening torque	0.5 Nm ... 0.8 Nm
Stripping length of the individual wire	12 mm

Dimensional drawing
Width	34 mm
Height	71.6 mm
Length	111 mm
Drill hole distance, horizontal	104 mm
Drill hole distance, vertical	27 mm

Flammability rating according to UL 94	V0
Contact material	Copper alloy
Contact surface material	Ag
Contact carrier material	PA
Standards/regulations	PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Stripping length of the individual wire

12 mm

Mechanical data
Insertion/withdrawal cycles	≥ 500

Ambient conditions
Ambient temperature (operation)	-40 °C ... 125 °C

Constructional and testing regulations	DIN EN 61984
		DIN EN 60664
		IEC 60352
Tests	DIN EN 61984
		DIN EN 60664
		IEC 60352
Testing
Standards/regulations	PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Assembly instructions	To ensure correct use, installation in housing with IP54 protection or better is required
Assembly instructions		Connectors may only be actuated when there is no load/voltage.