GW PL PA/HART - Protocol converter Phoenix Contact

Mã sản phẩm: 2316361

HART to PROFIBUS PA protocol converter

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Interface converter
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Supply
Supply voltage range	18.5 V DC ... 30 V DC ()
Nominal supply voltage	24 V DC
Max. current consumption	70 mA
Connection method	COMBICON plug-in screw terminal block

Supply
Connection method	COMBICON plug-in screw terminal block
Conductor cross section, flexible	0.20 mm² ... 2.50 mm²
Conductor cross section, rigid	0.20 mm² ... 2.50 mm²
Conductor cross section AWG	24 ... 12
Tightening torque	0.5 Nm ... 0.6 Nm

Data: PROFIBUS PA
Data rate	31.25 kbps
Number of connections	1
Connection method	COMBICON
No. of channels	1
Tightening torque	0.5 Nm ... 0.6 Nm
Connection technology	Screw connection
Termination resistor	Switchable
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24
Protocols supported	HART, PROFIBUS PA
Data: HART FSK
Number of connections	3
Connection method	COMBICON
No. of channels	4 (Active/Passive HART devices)
Tightening torque	0.5 Nm ... 0.6 Nm
Connection technology	Screw connection
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.02 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24

Color	gray
Housing material	PA V0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	2000 m
Permissible humidity (operation)	95 % (non-condensing)
Shock	30g, 18 ms
Vibration (operation)	5g, 10 Hz ... 150 Hz

Ex data
ATEX	PRESAFE 16ATEX7686X, II 3G, Ex nA IIC T4 Gc
IECEx	IECEx PRE 16.0001X, Ex nA IIC T4 Gc
UL, USA / Canada	Class I, Div. 2, Groups A, B, C, D Class I, Zone 2, AEx nA IIC T4, Ex nA IIC T4 GcX

Mounting type	DIN rail: 35 mm
Assembly instructions	on standard DIN rail NS 35 in accordance with EN 60715
Mounting position	On horizontal DIN rail NS 35 in acc. with EN 60715