FLT-SEC-P-T1-1S-264/50-FM - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2907388

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Plug-in lightning current arrester, in accordance with Type 1/Class I, for 1-phase power supply networks with separate N and PE (L1, PE, N).

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	I / II
IEC test classification		T1 / T2
EN type	T1 / T2
IEC power supply system	TN-S
IEC power supply system		TT
Type	DIN rail module, two-section, divisible
Product type	Combination type
Product family	SEC Family
Number of positions	2
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	12 V AC ... 250 V AC
Operating voltage		125 V DC (200 mA DC)
Operating current	10 mA AC ... 1 A AC
Operating current		1 A DC (30 V DC)

Connection method	Screw connection
Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	18 mm
Conductor cross section flexible	2.5 mm² ... 35 mm²
Conductor cross section rigid	2.5 mm² ... 35 mm²
Conductor cross section AWG	13 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²
Remote fault indicator contact
Connection method	Plug-in/screw connection via COMBICON
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	71.2 mm
Height	95.2 mm
Depth	74.5 mm
Horizontal pitch	4 Div.

Color	light grey RAL 7035
Color		traffic grey A RAL 7042
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA6.6-FR 20% GF
Insulating material		PBT-FR
Material group	I
Housing material	PA 6.6-FR 20 % GF
Housing material		PBT-FR

Mechanical data
Open side panel	No

Mode of protection	L-N
		L-PE
		N-PE
Direction of action	1L-N & N-PE
Nominal voltage U_N	240 V AC (TN-S)
Nominal voltage U_N		240 V AC (TT)
Maximum continuous operating voltage U_C(L-N)	264 V AC
Maximum continuous operating voltage U_C (L-PE)	264 V AC
Maximum continuous operating voltage U_C (N-PE)	350 V AC
Rated load current I_L	125 A (< 55 °C)
Residual current I_PE	≤ 0.01 mA
Nominal discharge current I_n (8/20) µs (L-N)	50 kA
Nominal discharge current I_n (8/20) µs (L-PE)	50 kA
Nominal discharge current I_n (8/20) µs (N-PE)	100 kA
Maximum discharge current I_max (8/20) µs	100 kA
Impulse discharge current (10/350) µs (L-N), charge	25 As
Impulse discharge current (10/350) µs (L-N), specific energy	625 kJ/Ω
Impulse discharge current (10/350) µs (L-N), peak current value I_imp	50 kA
Impulse discharge current (10/350) µs (L-PE), charge	25 As
Impulse discharge current (10/350) µs (L-PE), specific energy	625 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value I_imp	50 kA
Impulse discharge current (10/350) µs (N-PE), charge	50 As
Impulse discharge current (10/350) µs (N-PE), specific energy	2500 kJ/Ω
Impulse discharge current (10/350) µs (N-PE), peak current value I_imp	100 kA
Follow current quenching capacity I_fi (L-N)	50 kA
Follow current interrupt rating I_fi (N-PE)	100 A
Short-circuit current rating I_SCCR	50 kA
Voltage protection level U_p (L-N)	≤ 2.5 kV
Voltage protection level U_p (L-PE)	≤ 3 kV
Voltage protection level U_p (N-PE)	≤ 1.5 kV
Residual voltage U_res (L-N)	≤ 2.5 kV (at I_n)
Residual voltage U_res (L-PE)	≤ 3 kV (at I_n)
Residual voltage U_res (N-PE)	≤ 1.5 kV (at I_n)
TOV behavior at U_T (L-N)	415 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)		760 V AC (120 min / withstand mode)
TOV behavior at U_T (N-PE)	1200 V AC (200 ms / withstand mode)
Response time t_A	≤ 100 ns
Max. backup fuse with V-type through wiring	125 A (gG)
Max. backup fuse with branch wiring	500 A (gG)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (5 - 500 Hz/2.5 h/X, Y, Z)

UL specifications
Maximum continuous operating voltage MCOV (L-N)	264 V AC
Maximum continuous operating voltage MCOV (L-G)	264 V AC
Maximum continuous operating voltage MCOV (N-G)	350 V AC
Short-circuit current rating (SCCR)	50 kA
Voltage protection rating VPR (L-N)	1500 V
Voltage protection rating VPR (L-G)	1800 V
Voltage protection rating VPR (N-G)	1200 V
Nominal discharge current I_n	20 kA
Mode of protection	L-N
		L-G
		N-G
Nominal voltage	240 V AC
Rated load current I_L	50 A
Power distribution system	Single phase
Nominal frequency	50/60 Hz
SPD Type	2CA
UL indicator/remote signaling
AC operating voltage	125 V AC
AC operating current	1 A AC
UL connection data
Tightening torque	40 lb_f-in.
Conductor cross section AWG	3 ... 2