FLT-SEC-H-T1-1C-264/25-FM - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2801615

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Plug-in lightning current arrester, in accordance with Type 1/Class I, with integrated surge-proof fuse, for 1-phase power supply networks with combined PE and N installed in one conductor (L1, PEN).

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	Max. single impulse: 100 kA (8/20 µs)
		SPD according to AS/NZS 1768 Cat. C3

IEC test classification	I / II
EN type	T1 / T2
IEC power supply system	TN-C
IEC power supply system		TT
Type	DIN rail module, two-section, divisible
Product type	Combination type
Product family	SEC Family
Number of positions	1
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N	50 Hz (60 Hz)
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	12 V AC ... 250 V AC
Operating voltage		125 V DC (200 mA DC)
Operating current	10 mA AC ... 1 A AC
Operating current		1 A DC (30 V DC)

Connection method	Screw connection
Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	18 mm
Conductor cross section flexible	2.5 mm² ... 35 mm²
Conductor cross section rigid	2.5 mm² ... 35 mm²
Conductor cross section AWG	13 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²
Remote fault indicator contact
Connection method	Plug-in/screw connection via COMBICON
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	35.5 mm
Height	167 mm
Depth	74.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	2 Div.

Color	light grey RAL 7035
Color		traffic grey A RAL 7042
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6-FR 20% GF
Insulating material		PBT-FR
Material group	I
Housing material	PA 6.6-FR 20 % GF
Housing material		PBT-FR

Mechanical data
Open side panel	No

Mode of protection	L-PEN
Direction of action	1L-N/PE
Nominal voltage U_N	240 V AC (TN-C)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	264 V AC
Nominal discharge current I_n (8/20) µs	25 kA
Maximum discharge current I_max (8/20) µs	50 kA
Impulse discharge current (10/350) µs, charge	12.5 As
Impulse discharge current (10/350) µs, specific energy	160 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	25 kA
Follow current interrupt rating I_fi	50 kA
Short-circuit current rating I_SCCR	50 kA
Voltage protection level U_p	≤ 1.5 kV
Residual voltage U_res	≤ 1.5 kV (at I_n)
		≤ 2.5 kV (at 50 kA)
		≤ 1.2 kV (at 12.5 kA)
		≤ 1 kV (at 5 kA)
		≤ 0.9 kV (at 2.5 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs	≤ 1.5 kV
TOV behavior at U_T	415 V AC (5 s / withstand mode)
TOV behavior at U_T		460 V AC (120 min / withstand mode)
Response time t_A	≤ 100 ns
Additional technical data
Maximum continuous voltage U_C	275 V AC
Short-circuit current rating I_SCCR	100 kA
Follow current interrupt rating I_fi	100 kA

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 4000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %