FLT-EE-T1-N/PE-264/100 - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2910497

Lightning arrester, in acc. with type 1 / class I, for use in power supply networks between N and PE.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

IEC test classification	I / II
IEC test classification		T1 / T2
EN type	T1 / T2
IEC power supply system	TN-S
IEC power supply system		TT
Type	DIN rail module, one-piece
Product type	Combination type
Product family	Essential Edition
Number of positions	1
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method	Screw terminal blocks
Screw thread	M6
Tightening torque	8 Nm
Stripping length	19 mm
Conductor cross section flexible	16 mm² ... 35 mm²
Conductor cross section rigid	10 mm² ... 50 mm²
Conductor cross section AWG	6 ... 1
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²

Color	traffic grey B RAL 7043
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PBT-FR
Material group	I
Housing material	PBT-FR

Mechanical data
Open side panel	No

Mode of protection	N-PE
Direction of action	N-PE
Nominal voltage U_N	240 V AC (TN - only N-PE)
Nominal voltage U_N		240 V AC (TT - only N-PE)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	264 V AC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.1 mA
Nominal discharge current I_n (8/20) µs	100 kA
Impulse discharge current (10/350) µs, charge	50 As
Impulse discharge current (10/350) µs, specific energy	2500 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	100 kA
Follow current interrupt rating I_fi	100 A
Voltage protection level U_p	≤ 2 kV
Residual voltage U_res	≤ 1.5 kV (at I_n)
		≤ 1 kV (at 10 kA)
		≤ 0.9 kV (at 5 kA)
		≤ 0.8 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs	≤ 2 kV
TOV behavior at U_T	1200 V AC (200 ms / withstand mode)
Response time t_A	≤ 100 ns

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %