FLT 50 N/PE CTRL-4.0 - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2801637

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Lightning current arrester with encapsulated N-PE spark gap and ignition electronics, 1-channel. Voltage protection level: 4 kV Housing width: 17.5 mm (1 pitch)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	100 % lightning impulse sparkover voltage (1.2/50) µs ≤ 1.5 kV

IEC test classification	I
IEC test classification		T1
EN type	T1
IEC power supply system	TT
IEC power supply system		TN-S
Type	DIN rail module, one-piece
Product type	Combination type
Number of positions	1
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method	Screw terminal blocks
Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	14.5 mm
Conductor cross section flexible	2.5 mm² ... 25 mm²
Conductor cross section rigid	2.5 mm² ... 35 mm²
Conductor cross section AWG	6 ... 2

Dimensional drawing
Width	17.6 mm
Height	88.6 mm
Depth	66.2 mm
Horizontal pitch	1 Div.

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6
Material group	I
Housing material	PA 6.6

Mechanical data
Open side panel	No

Mode of protection	N-PE
Direction of action	N-PE
Nominal voltage U_N	230/400 V AC (TN - only N-PE)
Nominal voltage U_N		230/400 V AC (TT - only N-PE)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	260 V AC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.5 mA
Standby power consumption P_C	≤ 130 mVA
Nominal discharge current I_n (8/20) µs	50 kA
Impulse discharge current (10/350) µs, charge	25 As
Impulse discharge current (10/350) µs, specific energy	625 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	50 kA
Follow current interrupt rating I_fi	100 A (260 V AC)
Voltage protection level U_p	≤ 4 kV
Front of wave sparkover voltage at 6 kV (1.2/50) µs	≤ 4 kV
TOV behavior at U_T	1200 V AC (200 ms / withstand mode)
Response time t_A	≤ 100 ns

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %