FLT 35 CTRL-4.0 - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2801635

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Type 1/Class I/B arrester (lightning current arrester) with encapsulated arc chopping spark gap and ignition electronics, single-channel. Voltage protection level: 4 kV. Housing width: 17.5 mm (1 HP)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	100 % lightning impulse sparkover voltage (1.2/50) µs ≤ 1.5 kV

IEC test classification	I
IEC test classification		T1
EN type	T1
IEC power supply system	TT
IEC power supply system		TN-S
Type	DIN rail module, one-piece
Product type	Combination type
Number of positions	1
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method	Screw terminal blocks
Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	14.5 mm
Conductor cross section flexible	2.5 mm² ... 25 mm²
Conductor cross section rigid	2.5 mm² ... 35 mm²
Conductor cross section AWG	6 ... 2

Dimensional drawing
Width	17.6 mm
Height	90 mm
Depth	65.5 mm
Horizontal pitch	1 Div.

Color	black
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6
Material group	I
Housing material	PA 6.6

Mechanical data
Open side panel	No

Mode of protection	L-PEN
Direction of action	1L-N/PE
Nominal voltage U_N	230/400 V AC (TN)
Nominal voltage U_N		230/400 V AC (TT)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous operating voltage U_C (L-PEN)	385 V AC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.5 mA
Standby power consumption P_C	≤ 200 mVA
Nominal discharge current I_n (8/20) µs (L-PEN)	35 kA
Impulse discharge current (10/350) µs (L-PEN), charge	17.5 As
Impulse discharge current (10/350) µs (L-PEN), specific energy	306 J/Ω
Impulse discharge current (10/350) µs (L-PEN), peak current value I_imp	35 kA
Follow current quenching capacity I_fi (L-PEN)	3 kA (260 V AC)
Follow current quenching capacity I_fi (L-PEN)		1.5 kA (385 V AC)
Short-circuit current rating I_SCCR	3 kA (260 V AC)
Short-circuit current rating I_SCCR		1.5 kA (385 V AC)
Voltage protection level U_p (L-PEN)	≤ 4 kV
TOV behavior at U_T (L-PEN)	440 V AC (5 s / withstand mode)
TOV behavior at U_T (L-PEN)		440 V AC (120 min / withstand mode)
Response time t_A (L-PEN)	≤ 100 ns
Max. backup fuse with V-type through wiring	80 A AC (gG)
Max. backup fuse with branch wiring	400 A AC (gG)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %