FLT 100 N/PE-1.5 - Type 1+2 combined lightning current and surge arrester Phoenix Contact

Mã sản phẩm: 2800303

Lightning current arrester with encapsulated N-PE spark gap, single-channel. Housing width: 35 mm (2 pitches)

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

IEC test classification	I
IEC test classification		T1
EN type	T1
IEC power supply system	TN-S
IEC power supply system		TT
Type	DIN rail module, two-section, divisible
Product type	Combination type
Number of positions	1
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method	Screw terminal blocks
Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	18 mm
Conductor cross section flexible	2.5 mm² ... 25 mm²
Conductor cross section rigid	2.5 mm² ... 35 mm²
Conductor cross section AWG	13 ... 2

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6/PBT
Material group	I
Housing material	PBT

Mechanical data
Open side panel	No

Mode of protection	N-PE
Direction of action	N-PE
Nominal voltage U_N	240 V AC (TN - only N-PE)
Nominal voltage U_N		240 V AC (TT - only N-PE)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	260 V AC
Rated load current I_L	125 A (< 55 °C)
Residual current I_PE	≤ 0.01 mA
Nominal discharge current I_n (8/20) µs	100 kA
Impulse discharge current (10/350) µs, charge	50 As
Impulse discharge current (10/350) µs, specific energy	2500 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	100 kA
Follow current interrupt rating I_fi	100 A (260 V AC)
Voltage protection level U_p	≤ 1.5 kV
Residual voltage U_res	≤ 1.5 kV (at I_n)
		≤ 1 kV (at 10 kA)
		≤ 0.9 kV (at 5 kA)
		≤ 0.8 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs	≤ 1.5 kV
TOV behavior at U_T	1200 V AC (200 ms / withstand mode)
Response time t_A	≤ 100 ns

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (5 - 500 Hz/2.5 h/X, Y, Z)

Air clearances and creepage distances
Standards/regulations	EN 60664-1 / IEC 60664-1 / IEC 61643-11
Standards/specifications	IEC 61643-11
Standards/specifications	EN 61643-11