FLKM-PA-D37/ETHA - Front adapters Phoenix Contact

Mã sản phẩm: 1076338

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

VARIOFACE front adapter for Siemens SIMATIC® ET 200SP HA, with a 37-pos. D-SUB male strip for digital 24 V DC and analog peripheral modules, max. 32 channels can be connected

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Front adapter
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Operating voltage (AC)	≤ 25 V AC
Operating voltage (DC)	≤ 60 V DC
Nominal operating mode	100% operating factor
Current (Per path)	≤ 1 A
Current (Per path)		≤ 2 A (per path 17 and - 18 with operating voltage supply via D-SUB male strip)
Current	≤ 10 A (With operating voltage feed over screw connection)
Rated insulation voltage	63 V
Rated surge voltage	0.6 kV (Functional insulation)
Supported controller SIEMENS ET 200SP HA
Suitable terminal block	6DL1193-6TP00-0BH1
		6DL1193-6TP00-0DH1
		6DL1193-6TP00-0BM1
		6DL1193-6TP00-0DM1
Suitable I/O module	6DL1131-6BH00-0PH1 (Terminal Block H1/M1)
		6DL1131-6BL00-0PH1 (Terminal Block H1/M1)
		6DL1131-6TH00-0PH1 (Terminal Block H1/M1)
		6DL1132-6BH00-0PH1 (Terminal Block H1/M1)
		6DL1132-6BL00-0PH1 (Terminal Block H1/M1)
		6DL1133-6EW00-0PH1 (Terminal Block H1/M1)
		6DL1134-6JH00-0PH1 (Terminal Block H1/M1)
		6DL1134-6TH00-0PH1 (Terminal Block H1/M1)
		6DL1135-6TF00-0PH1 (Terminal Block H1/M1)

Controller level
Connection method	Plug-in connection
Number of positions	36
Field level
Connection method	D-SUB pin strip
Number of connections	1
Number of positions	37
Supply
Connection method	Screw connection
Number of connections	1
Number of positions	3
Conductor cross section rigid	0.34 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Width	22 mm
Height	89 mm

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 70 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Altitude	≤ 2000 m

UL, USA/Canada
Identification	UL 508 Recognized

Standards/regulations

DIN EN 50178

Mounting type	Plug-in mounting
Assembly instructions	in rows with zero spacing
Mounting position	any

General	Once plugged in, the front adapter and terminal block form a single unit that can no longer be separated.
General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	Against adjacent modules in the support rail direction at least one functional insulation on the output-side is complied with. If the application has higher requirements on the insulation (basic insulation or reinforced insulation), then these must be realized through suitable measures (e. g. partition plates).