FLKM-2KS40/PMT/ST/YCS - Passive module Phoenix Contact

Mã sản phẩm: 2321981

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

1:1 interface module for Yokogawa AAI 141, AAI 143, AAV 141, AAV 142, AAI 543, AAV 542, AAI 841 and AAB 841 analog I/O modules. Redundant system connection, screw connections with knife disconnection on the field side.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).

Product type	Interface module
No. of channels	8
		12
		16
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	II
Pollution degree	2

No. of channels	812 16
Max. permissible current	1 A (per path)
Nominal voltage U_N	< 50 V DC
Air clearances and creepage distances between the power circuits
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV (Functional insulation)
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card	AAI543
		AAI141
		AAI143
		AAI841
		AAV141
		AAV142
		AAB841
		AAV542
Supported controller YOKOGAWA STARDOM
Suitable I/O card	NFAI141
		NFAI143
		NFAI543
		NFAI841
		NFAB841
		NFAV542
		NFAV141
		NFAV142

Field level
Connection method	Screw connection with disconnect knife
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 m²
Conductor cross section AWG	24 ... 14
Controller level
Connection method	Yokogawa KS-compatible
Number of connections	2
Number of positions	40
Note	Usable system cables: Phoenix Contact YUC40, Yokogawa KS1
Tightening torque	0.5 Nm

Status display present

Dimensional drawing
Width	180.5 mm
Height	112 mm
Depth	56 mm

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 70 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Altitude	≤ 2000 m