FLKM 14-PA-S300 - Front adapters Phoenix Contact

Mã sản phẩm: 2299770

VARIOFACE front adapter, for SIMATIC S 7-300, 2 x 8 channels can be connected.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Product type	Front adapter
Insulation characteristics
Insulation	Functional insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Functional insulation
Overvoltage category	II
Pollution degree	2

Operating voltage (AC)	≤ 25 V AC
Operating voltage (DC)	≤ 60 V DC
Nominal operating mode	100% operating factor
Current (Per path)	≤ 1 A
Current ()	≤ 2 A
Current ()	≤ 8 A (With operating voltage feed-in via spade connection)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	63 V
Rated surge voltage	0.6 kV
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card	6ES7321-1BH50-0AA0
		6ES7321-7BH01-0AB0
		6ES7321-1BH02-0AA0
		6ES7321-1BH10-0AA0
		6ES7322-1BH01-0AA0
		6ES7322-1BH10-0AA0
		6ES7322-8BF00-0AB0
		6ES7323-1BH01-0AA0
		6ES7331-7HF01-0AB0
		6ES7331-7KF02-0AB0
		6ES7331-7KB02-0AB0
		6ES7331-7TF01-0AB0
		6ES7332-5HD01-0AB0
		6ES7332-5HB01-0AB0
		6ES7332-7ND02-0AB0
		6ES7332-8TF01-0AB0
		6ES7334-0CE01-0AA0
		6ES7334-0KE00-0AB0
		6ES7335-7HG01-0AB0
		6ES7338-4BC01-0AB0
		6ES7350-1AH03-0AE0
		6ES7351-1AH01-0AE0
		6ES7352-1AH02-0AE0
		6ES7353-1AH01-0AE0
		6ES7354-1AH01-0AE0
		6ES7355-0VH10-0AE0
		6ES7355-1VH10-0AE0

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 50178

Assembly instructions	in rows with zero spacing
Mounting position	any

General	To prevent short circuits, all wire bridges on the following I/O cards are to be separated. There may not be any voltage supply at the front adapter. 6ES7 321-1BH50-0AA0 6ES7 321-7BH01-0AB0 6ES7 322-8BF00-0AB0 6ES7 331-7KF02-0AB0 6ES7 331-7HF01-0AB0 6ES7 331-7KB02-0AB0 6ES7 331-7TF01-0AB0 6ES7 332-5HD01-0AB0 6ES7 332-5HB01-0AB0 6ES7 332-7ND02-0AB0 6ES7 334-0CE01-0AA0 6ES7 334-0KE00-0AB0 6ES7 335-7HG01-0AB0 6ES7 338-4BC01-0AB0 6ES7 350-1AH03-0AE0 6ES7 351-1AH01-0AE0 6ES7 352-1AH02-0AE0 6ES7 353-1AH01-0AE0 6ES7 354-1AH01-0AE0 6ES7 355-0VH10-0AE0 6ES7 355-1VH10-0AE0
General	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).