FLKM 14-PA-AB/1756/EXTC - Front adapters Phoenix Contact

Mã sản phẩm: 2302861

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

VARIOFACE front adapters, for Allen Bradley ControlLogix and Honeywell PlantScape, max. 2 x 8 channels can be connected. The front adapters are pushed into the high 1756-TBE hoods (not supplied as standard).

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Front adapter
Insulation characteristics
Insulation	Functional insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Functional insulation
Overvoltage category	II
Pollution degree	2

Operating voltage (AC)	≤ 25 V AC
Operating voltage (DC)	≤ 60 V DC
Nominal operating mode	100% operating factor
Current (Per path)	≤ 1 A
Current ()	≤ 8 A ()
Air clearances and creepage distances between the power circuits
Rated insulation voltage	63 V
Rated surge voltage	0.6 kV
Supported controller ALLEN-BRADLEY ControlLogix
Suitable I/O card	1756-IA8D
		1756-OB16E
		1756-IF6I
		1756-IR6I
		1756-IT6I
		1756-OF4
		1756-OF6CI
		1756-OF6VI
		1756-OF8
		1756-PLS
		1756-IF6CIS
		1756-OF8H
Supported controller HONEYWELL Experion PKS C200
Suitable I/O card	TC-IDX 081
		TC-IXR 061
		TC-IAH 061
		TC-OAH 061
		TC-OAV 061
		TC-OAV 081
		TC-IXL 061

Field level
Connection method	IDC/FLK pin strip
Number of connections	2
Number of positions	14
Pitch	2.54 mm
Supply
Connection method	Screw connection
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 50178

Assembly instructions	in rows with zero spacing
Mounting position	any

General	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).