FL WLAN 1101 - Wireless module Phoenix Contact

Mã sản phẩm: 2702538

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

WLAN access point, client for USA and Canada, with two internal antennas for single-hole mounting, IP54, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz, connections: COMBICON 9 ... 32 V DC, RJ45: for LAN, web, http/https, Command Line Interface

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Trade restriction
CE note	The products are offered exclusively for export outside the EU and the European Economic Area.

Type	Stand-Alone
Product type	Wireless module
Insulation characteristics
Overvoltage category	none
Pollution degree	2
Wireless card
Number	1
Type	IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps
Assembly instructions	Permanently installed

Supply: Module electronics
Connection technology	COMBICON
Connection method	Push-in spring connection
Note on the connection method	Recommended conductor cross section: 0.75 mm²
		Recommended ferrule: connection length 10 mm
		Recommended crimping pliers: trapezoidal or square
Designation	1966101 FMC 1,5/ 3-STF-3,5
Number of positions	3
Cross section range AWG	24 ... 16 (Use copper wires rated 75° C (UL))
Supply voltage	24 V DC (SELV)
Supply voltage range	18 V DC ... 32 V DC (PELV/SELV)
Supply voltage range		9 V DC ... 32 V DC (PELV/SELV (from HW version 05))
Supply current	typ. 120 mA (at 24 V DC)
Current consumption	max. 250 mA (at 18 V DC)
Current consumption		max. 400 mA (at 9 V DC)

1966101 FMC 1,5/ 3-STF-3,5
Connection method	Push-in spring connection
Conductor cross section, rigid	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	10 mm

Antenna
Number	2
Connection method	permanently installed
Note on the connection method	MIMO
Gain	5 dBi
Functions
Operating modes	Access Point / Client Adapter / Repeater
Configuration	Web-based management, automated CLI
Quality of service (QoS)	Yes
Security	802.11i
		WPA PSK (preshared key)
		WPA2
		AES
		TKIP
		MAC filter
		Supports 802.1X/RADIUS
Wireless licenses	USA, Canada
Country support	USA
Country support		Canada
Ethernet (RJ45)
Number of interfaces	1
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
No. of channels	1 (RJ45 ports)
Wireless
Designation	Wireless LAN
Antenna connection method	(Internal)
Frequency band	2.4 GHz
Frequency band		5 GHz
Wireless standard	WLAN
		IEEE 802.11
		a
		b
		g
		n
Transmission power	max. 20 dBm (EIRP)
Number of wireless interfaces	1 IEEE 802. 11 a/b/g/n
Wireless modules that can be connected	10 (In Access Point mode max. 2 SSIDs)

Dimensional drawing
Width	62.8 mm
Height	36.5 mm
Depth	113.2 mm
Note on dimensions	Outside dimensions

Color	black
Material base plate	Die-cast zinc, nickel-plated
Housing material	Polycarbonate, PC

Ambient conditions
Degree of protection	IP54
Ambient temperature (operation)	0 °C ... 60 °C
Note	Degree of protection when installed
Air pressure (operation)	800 hPa ... 1080 hPa (up to 2000 m above sea level)
Air pressure (storage/transport)	660 hPa ... 1080 hPa (up to 3500 m above sea level)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

Emitted interference
Standards/regulations	FCC/CFR 47, Part 15.107
Test result	Class B
Emitted interference
Standards/regulations	FCC/CFR 47, Part 15.109
Test result	Class A
Emitted interference
Standards/regulations	ICES-003 Issue 6 section 6.1
Test result	Class B
Emitted interference
Standards/regulations	ICES-003 Issue 6 section 6.2
Test result	Class A