FL SWITCH SF 8TX - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 2832771

Ethernet Switch, 8 TP RJ45 ports, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), autocrossing function

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Housing material

Aluminum

Mounting type	DIN rail mounting
Connection method	RJ45

Ethernet (RJ45)
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps
Transmission physics	Ethernet in RJ45 twisted pair
Transmission length	100 m (per segment)
Signal LEDs	Data receive, link status
No. of channels	8 (RJ45 ports)
Potential-free signaling contact
Connection method	Plug-in/screw connection via COMBICON

Type	Block design
Product type	Switch
Product family	Unmanaged Switch SF
MTTF	45.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Insulation characteristics
Protection class	III (IEC 61140, EN 61140, VDE 0140-1)
Switch functions
Basic functions	Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Signal contact control voltage	24 V DC (typical)
Status and diagnostic indicators	LEDs: U_S1, U_S2 (redundant voltage supply), link and activity per port
Additional functions	Autonegotiation
Security functions
Basic functions	Unmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode

Power consumption	4.8 W (nominal)
Local diagnostics	US1/2 Supply voltage Green LED
		LNK/ACT Link status/data transmission Green LED
		100 Data transmission speed Yellow LED
Maximum power dissipation for nominal condition	4.8 W
Test section	500 V DC 1 min.
Transmission medium	Copper
Supply
Supply voltage (DC)	24 V DC (redundant)
Supply voltage range	18.5 V DC ... 30.2 V DC
Power supply connection	Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Typical current consumption	200 mA (at U_S = 24 V DC)
Typical current consumption		95 mA (at U_S = 24 V DC: >VC 14)
Function
Signal contact control voltage	24 V DC (typical)

Connection method	Screw connection
Conductor cross section, rigid	0.2 mm² ... 2.5 mm²
Conductor cross section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	7 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	0 °C ... 55 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Altitude	2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Vibration (operation)	in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)	86 kPa ... 108 kPa (up to 1500 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (up to 3500 m above sea level)
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37	Sulfur dioxide (SO₂) 10 ±0.3 cm³/m³, hydrogen sulfide (H₂S) 1 ±0.3 cm³/m³, at 25°C and 75% humidity and exposure of four days

Free from substances that could impair the application of coating

In acc. with VW specification

Conformance with EMC directives	IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
		IEC 61000-4-3 (immunity to radiated interference) Criterion A
		IEC 61000-4-4 (burst) Criterion B
		IEC 61000-4-5 (surge) Criterion B
		IEC 61000-4-6 (immunity to conducted interference) Criterion A
		IEC 61000-4-8 (immunity to magnetic fields) Criterion A
		EN 55022 (emitted interference) Criterion A
Noise immunity	EN 61000-6-2:2005
Electromagnetic compatibility	Conformance with EMC Directive 2004/108/EC
Noise emission	EN 61000-6-4