FL SWITCH IRT IP 4TX - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 2700694

Ethernet Switch, with four push-pull 10/100 Mbps RJ45 ports for PROFINET RT/IRT, in degree of protection IP67

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Housing material

Zinc die-cast, surface bronzed and nickel-plated

Mounting type

Wall mounting

Ethernet
Connection method	RJ45
Transmission speed	10/100 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
Signal LEDs	Supply voltage, data transmission, error, link, activity
No. of channels	4 (RJ45 ports)

Type	Stand-Alone
Product type	Switch
Product family	Managed Switch IRT
MTTF	362.73 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		218.23 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		37.87 Years (SN 29500 standard, temperature 60°C, operating cycle 100%)
Switch functions
Basic functions	Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device.
Signal contact control voltage	24 V
PROFINET conformance class	Conformance-Class C
PROFINET device function	PROFINET device
PROFINET specification	PROFINET-IO RT/IRT, Spec. 2.x
Redundancy	MRP (Media Redundancy Protocol)
Status and diagnostic indicators	LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail)
Supported browsers	Internet Explorer 5.5 or higher
Security functions
Basic functions	Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device.

Local diagnostics	US1/2 Supply voltage US1, US2 Green LED
		FAIL Div. LED red
		LINK Link status Green LED
		ACT Receiving/sending telegrams Green LED
		BF Bus errors LED red
Maximum power dissipation for nominal condition	3.96 W
Test section	Between the Ethernet ports 1500 V AC 1 min.
Test section		24 V supply (US) / FE 500 V DC 1 min.
Transmission medium	Copper
Supply
Supply voltage (DC)	24 V DC (redundant)
Supply voltage range	18.5 V DC ... 30.2 V DC
Power supply connection	Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Max. current consumption	165 mA
Typical current consumption	165 mA (at U_S = 24 V DC)
Current consumption	165 mA (at 24 V DC)
Function
Signal contact control voltage	24 V
Supply: Module electronics
Supply voltage	24 V DC
Supply voltage range	18 V DC ... 32 V DC (including ripple)

Connection method	Screw connection
Conductor cross section, rigid	0.2 mm² ... 2.5 mm²
Conductor cross section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	7 mm

Ambient conditions
Degree of protection	IP67
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Vibration (operation)	in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Air pressure (operation)	86 kPa ... 108 kPa (2000 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (3500 m above sea level)

Conformance with EMC directives	EN 55022 (emitted interference) Class A
		EN 61000-4-2 (ESD) Criterion A
		EN 61000-4-3 (electromagnetic fields) Criterion A, 10 V/m
		EN 61000-4-5 (surge) Criterion B
		EN 61000-4-3 (electromagnetic fields) EN 61000-4-4 (EFT burst) Criterion A, 2.2 kV
		EN 61000-4-6 EN 61000-4-6 (line noise immunity) Criterion A, Field intensity: 10 V/m
		EN 61000-4-3 (electromagnetic fields) EN 61000-4-3 (electromagnetic fields) Criterion A, 10 V/m
		60950-1
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU

Functionality
Basic functions	Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device.
System requirements
Supported browsers	Internet Explorer 5.5 or higher