FL SWITCH 2303-8SP1 - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 1278397

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Managed Switch 2000, 3 RJ45 ports 10/100/1000 Mbps, PROFINET Conformance-Class B

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	45 mm
Height	130 mm
Depth	119 mm

General

Support by phone or on-site (fee is charged)

Housing material

Polycarbonate fiber reinforced

Mounting type

DIN rail mounting

Ethernet (RJ45)
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100/1000 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
Signal LEDs	Data receive, link status
No. of channels	3 (RJ45 ports)
Ethernet (SPE)
Connection method	SPE
Note on the connection method	10BASE T1L
Note on the connection method		PoDL Power Class 11
Transmission speed	10 Mbps (full duplex)
Transmission physics	Copper
Transmission length	1000 m (per segment)
Signal LEDs	Data receive, link status
No. of channels	8 ()

Type	Book type
Product type	Switch
Product family	Managed Switch 2000
MTTF	185.12 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		122.03 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		25.3 Years (SN 29500 standard, temperature 70°C, operating cycle 100%)
Signal delay	≥ 1.9 µs (Store-and-Forward mode, 10/100/1000 Mbps, depending on the frame size)
Insulation characteristics
Protection class	III (VDE 0106)
Degree of pollution	2
Switch functions
Diagnostic functions	RMON History
		LLDP (Link Layer Discovery Protocol)
		SNMP-Traps
		N:1-Portmirroring
		ACD (Address Conflict Detection)
		SysLog
		CRC-Surveillance
Basic functions	Store-and-forward switch, complies with IEEE 802.3
PROFINET conformance class	Conformance-Class B
PROFINET device function	PROFINET device
PROFINET device function		Fast Startup
Filter functions	Quality of Service (8 priority classes)
		Class of Service
		DiffServ/DSCP
		Port-Priorisierung
		VLAN (up to 32 VLANs)
		IGMP Snooping/Querier (v1/v2)
		Auto-Query-Port
		Extended Multicast Filtering
IP parameterization	DHCP-Client
		DHCP Option 82 (Relay Agent)
		DHCP server (pool-based, port-based)
		BootP
		DCP (Discovery and Configuration Protocol)
MAC address table	8k
Management	Web-based management (HTTP/HTTPS)
		Role-based user management (LDAP, RADIUS)
		SNMPv1/v2/v3
		Command-line interface (Telnet, SSH)
Redundancy	MRP (Media Redundancy Protocol)
		RSTP (Rapid Spanning Tree Protocol)
		FRD (Fast Ring Detection)
		Large Tree Support
		LACP (Link Aggregation Control Protocol)
		PROFINET S2 system redundancy
Status and diagnostic indicators	LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Additional functions	Transmission of MMS and GOOSE (IEC 61850-8-1)
Additional functions		Transmission of Modbus/TCP
Time synchronization	SNTP (Simple Network Time Protocol)
Security functions
Port security	MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass
Basic functions	Store-and-forward switch, complies with IEEE 802.3

Power consumption	65 W (V_in = Max, T_amb = Max, I_PSE = 8x I_PoDLmax, 100% data traffic on all connected ports)
Local diagnostics	US1/2 Supply voltage US1, US2 Green LED
		FAIL Div. LED red
		LINK Link status Green LED
Maximum power dissipation for nominal condition	15 W (V_in = Min, T_amb = Max, I_PSE = 8x I_PoDLmax, 100% data traffic on all connected ports)
Test voltage	500 V DC
Test section	for 1 minute to FE 500 V DC
		for one minute between logic and Ethernet 2.25 kV DC
		for one minute between PoDL and logic 2.25 kV DC
Transmission medium	Copper
Supply
Supply voltage	24 V DC (Simultaneous PoDL supply according to IEEE 802.3cg)
Supply voltage range	20 V DC ... 32 V DC
Power supply connection	via COMBICON, max. conductor cross section 1.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Max. current consumption	2.2 A (U_S = Min, T_amb = Max, SPE = 8x max. PoDL power, 100% data traffic on all connected ports)
Typical current consumption	1.03 A (at U_S = Nom, T_amb = 25°C, SPE = 4x max. PoDL power, 100% data traffic on all connected ports)

Connection method	Push-in spring connection
Note on the connection method	Only use copper cables that are suitable for the permitted temperature range (-40°C to 75°C) as connecting cables.
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	9 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)
Shock (operation)	30g (EN 60068-2-27)
Vibration (operation)	in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)	80 kPa ... 110 kPa up to 2000 m above mean sea level (Without derating)
Air pressure (storage/transport)	79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

Free from substances that could impair the application of coating

Yes

Conformance with EMC directives	EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
		EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
		EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion B, I/O cables up to 2.2 kV
		EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
		EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
		EN 61000-6-4 EN 61000-6-4 (interference) Class A
		EN 61000-6-4 EN 61000-6-4 (conducted interference) Class A
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 61000-6-4