FL SWITCH 2206-2FX SM ST - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 2702333

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Managed Switch 2000, 6 RJ45 ports 10/100 Mbps, 2 ST single mode 100 Mbps, PROFINET Conformance-Class B, Extended temperature range

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	45 mm
Height	130 mm
Depth	119 mm

General

Support by phone or on-site (fee is charged)

Housing material

Polycarbonate fiber reinforced

Mounting type

DIN rail mounting

Ethernet (RJ45)
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
Signal LEDs	Data receive, link status
No. of channels	6 (RJ45 ports)
Ethernet FO
Number of interfaces	2
Connection method	ST
Transmission speed	100 Mbps (full duplex)
Transmit capacity, minimum	-15 dBm
Transmit capacity, maximum	-7 dBm
Minimum receiver sensitivity	-34 dBm
Maximum receiver sensitivity	-3 dBm
Transmission physics	Single-mode fiberglass
Transmission length	36000 m (fiberglass with F-G 9/125 0.36 dB/km)
		32000 m (fiberglass with F-G 9/125 0.4 dB/km)
		26000 m (fiberglass with F-G 9/125 0.5 dB/km)
Wavelength	1300 nm
Signal LEDs	Data receive, link status
No. of channels	2 (ST single mode)

Digital
Output name	Alarm output

Type	Book type
Product type	Switch
Product family	Managed Switch 2000
MTTF	343.16 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		153.37 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		18.66 Years (SN 29500 standard, temperature 70°C, operating cycle 100%)
Special properties	Extended temperature range
Signal delay	≥ 6.5 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size)
Insulation characteristics
Protection class	III (VDE 0106)
Degree of pollution	2
Switch functions
Diagnostic functions	RMON History
		LLDP (Link Layer Discovery Protocol)
		SNMP-Traps
		N:1-Portmirroring
		ACD (Address Conflict Detection)
		SysLog
		CRC-Surveillance
Basic functions	Store-and-forward switch, complies with IEEE 802.3
Signal contact control voltage	typ. 24 V DC
PROFINET conformance class	Conformance-Class B
PROFINET device function	PROFINET device
PROFINET device function		Fast Startup
Filter functions	Quality of Service (8 priority classes)
		Class of Service
		DiffServ/DSCP
		Port-Priorisierung
		VLAN (up to 32 VLANs)
		IGMP Snooping/Querier (v1/v2)
		Auto-Query-Port
		Extended Multicast Filtering
IP parameterization	DHCP-Client
		DHCP Option 82 (Relay Agent)
		DHCP server (pool-based, port-based)
		BootP
		DCP (Discovery and Configuration Protocol)
MAC address table	8k
Management	Web-based management (HTTP/HTTPS)
		Role-based user management (LDAP, RADIUS)
		SNMPv1/v2/v3
		Command-line interface (Telnet, SSH)
Redundancy	MRP (Media Redundancy Protocol)
		RSTP (Rapid Spanning Tree Protocol)
		FRD (Fast Ring Detection)
		Large Tree Support
		LACP (Link Aggregation Control Protocol)
		PROFINET S2 system redundancy
Status and diagnostic indicators	LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Additional functions	Transmission of MMS and GOOSE (IEC 61850-8-1)
Additional functions		Transmission of Modbus/TCP
Time synchronization	SNTP (Simple Network Time Protocol)
Security functions
Port security	MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass
Basic functions	Store-and-forward switch, complies with IEEE 802.3

Local diagnostics	US1/2 Supply voltage US1, US2 Green LED
		FAIL Div. LED red
		LINK Link status Green LED
Maximum power dissipation for nominal condition	6.75 W (U_S = Min, T_amb = Max, DO_I = Max)
Test voltage	500 V DC
Test section	for one minute 500 V DC
Transmission medium	Copper
Transmission medium		FO
Supply
Supply voltage (DC)	24 V DC (redundant)
Supply voltage range	9 V DC ... 57 V DC
Power supply connection	via COMBICON, max. conductor cross section 1.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Max. current consumption	1.5 A (U_S = Min, T_amb = Max, DO_I = Max)
Typical current consumption	235 mA (at U_S = 24 V DC and 25 °C ambient temperature)
Current consumption	260 mA
Function
Signal contact control voltage	typ. 24 V DC

Connection method	Push-in spring connection
Note on the connection method	Use only copper connecting cables providing the permitted temperature range (-40 °C ... 75 °C).
Conductor cross section, rigid	0.25 mm² ... 1.5 mm²
Conductor cross section, flexible	0.25 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16
Stripping length	9 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)
Shock (operation)	30g (EN 60068-2-27)
Vibration (operation)	in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)	80 kPa ... 110 kPa up to 2000 m above mean sea level (Without derating)
Air pressure (storage/transport)	79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)

Free from substances that could impair the application of coating

Yes

Shipbuilding approval	Tested in accordance with IEC 60945 and IACS E10
ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	DEMKO 16 ATEX 1709X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx ULD 16.0018 X
UL, USA/Canada
Identification	cULus
UL Ex, USA / Canada
Identification	Class I, Division 2, Groups A, B, C, and D, T4
		Class I, Zone 2, AEx ec IIC T4
		Ex ec IIC T4 Gc X
Certificate	E366272
Note	UL 60079-0 Ed. 6 / UL 60079-7 Ed. 5, CSA 22.2 No. 60079-0 Ed. 3 / CSA C22.2 No. 60079-7 Ed. 2
EAC Ex
Identification	2Ex e IIC T4 Gc X
Certificate	RU C-DE.HB49.B.00118/21
The following continue to apply for EAC Ex:
Identification	При монтаже использовать походящий допущенный корпус со степенью защиты не ниже IP66.
		На корпусе/шкафу управления должна быть размещена предупреждающаяя надпись, запрещающая открывать корпус или шкаф во взрывоопасной зоне.
		Эксплуатация устройства допускается только при условии, что все оптические порты заняты подключенными устройствами или закрыты прилагаемыми заглушками.
CCC / China-Ex
Identification	Ex ec IIC T4 Gc
Certificate	2022122310115629
Corrosive gas test
Identification	ISA S71.04.2013 G3 Harsh Group A
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIMA22UKEX2702910X
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

Conformance with EMC directives	EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
		EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
		EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
		EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
		EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
		EN 61000-6-2 EN 61000-6-4 (interference) Class A
		EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 61000-6-4