FL SWITCH 1001T-4POE - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 2891064

PoE+ Ethernet switch conforms to IEEE 802.3at. Includes four PoE+ ports and one standard RJ45 port, all with 10/100 Mbps speeds.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	Mode B PoE
Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Housing material

Aluminum

Mounting type

DIN rail mounting

Ethernet
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps
Transmission physics	Ethernet RJ45
Transmission length	100 m (Between transmitter / receiver)
Signal LEDs	LNK/ACT, 100, POE
No. of channels	1 (RJ45 port)
Ethernet (PoE)
Connection method	RJ45
Transmission speed	10/100 Mbps
Transmission physics	Ethernet RJ45
Transmission length	100 m (Between transmitter / receiver)
Signal LEDs	LNK/ACT, 100, POE
No. of channels	4 (RJ45 ports)

Type	Stand-Alone
Product type	Switch
Product family	Unmanaged PoE Switches 1000
MTTF	68 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Switch functions
Basic functions	PSE, complies with IEEE 802.3at
Signal contact control voltage	24 V DC
Signal contact control current	100 mA
Status and diagnostic indicators	LEDs: U_S1, U_S2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Additional functions	Autonegotiation
Security functions
Basic functions	PSE, complies with IEEE 802.3at

Power consumption	129 W
Local diagnostics	US1, US2 Supply voltage Green LED
		PoE PoE detection Yellow LED
		LNK/ACT Link status/data transmission Green LED
		Alarm Power failure at US1 or US2/Link failure
Maximum power dissipation for nominal condition	129.6 W
Test section	Supply voltage/functional ground 500 V AC 1 min.
Transmission medium	Copper
Supply
Supply voltage (DC)	24 V DC
Supply voltage range	18 V DC ... 57 V DC
Power supply connection	Via COMBICON, max. conductor cross section 2.5 mm²
Inrush current	18 A (57 V DC for 100 μs)
Inrush current		10 A (24 V DC for 100 μs)
Residual ripple	3.6 V_PP (within the permitted voltage range)
Max. current consumption	6.2 A (Maximum, nominal load)
Typical current consumption	148 mA (at U_S = 24 V DC)
Function
Signal contact control voltage	24 V DC
Signal contact control current	100 mA

Connection technology
Connection name	Power supply
pluggable	yes
Power supply
Connection method	Screw connection
Conductor cross section, rigid	0.2 mm² ... 2.5 mm²
Conductor cross section, flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Stripping length	7 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 75 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Air pressure (operation)	86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (3500 m above sea level)

Conformance with EMC directives	IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
		IEC 61000-4-3 (immunity to radiated interference) Criterion A
		IEC 61000-4-4 (burst) Criterion B
		IEC 61000-4-5 (surge) Criterion B
		IEC 61000-4-6 (immunity to conducted interference) Criterion A
		IEC 61000-4-8 (immunity to magnetic fields) Criterion A
		EN 55022 (emitted interference) Criterion A
Electromagnetic compatibility	Conformance with EMC Directive 2004/108/EC