FL PSE 2TX - Ethernet module Phoenix Contact

Mã sản phẩm: 2891013

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Factoryline Power-over-Ethernet modules (PSE) for midspan power supply according to IEEE 802.3af, two PoE supply ports, no configuration required, function possible with 10 and 100 Mbps networks

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Width	45 mm
Height	99 mm
Depth	112 mm

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Color	green
Housing material	Polyamide (PA 6.6)

Mounting type	DIN rail mounting
Connection method	RJ45, shielded

Ethernet (RJ45)
Connection method	RJ45
Transmission speed	10/100 Mbps
Transmission physics	Copper
Transmission length	100 m (Between transmitter / receiver)
Signal LEDs	PoE detection
No. of channels	2 (RJ45 ports)
Ethernet
Connection method	RJ45
Transmission speed	10/100 Mbps
Transmission length	up to 100 m
No. of channels	2 (RJ45 ports)

Type	Stand-Alone
Product type	Power over Ethernet devices
Operating mode	Mode transparent
Insulation characteristics
Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Local diagnostics	US Supply voltage Green LED
Local diagnostics		PoE PoE detection Yellow LED
Maximum power dissipation for nominal condition	2.4 W
Test section	for one minute 1500 V AC 1 min.
Transmission medium	Copper
Supply
Supply voltage (DC)	24 V DC (via COMBICON; max. conductor cross section 2.5 mm²)
Supply voltage range	18.5 V DC ... 30.5 V DC
Power supply connection	Via COMBICON, max. conductor cross section 2.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Typical current consumption	typ. 100 mA (During no load; approx. 1800 mA at 24 V at the input with maximum load and 25°C ambient temperature)

Conductor connection
Connection method	RJ45, shielded

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	0 °C ... 55 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Permissible humidity (operation)	30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	30 % ... 95 % (non-condensing)
Vibration (operation)	in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)	86 kPa ... 108 kPa (2000 m above sea level)
Air pressure (storage/transport)	66 kPa ... 108 kPa (3500 m above sea level)
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37	Sulfur dioxide (SO₂) 10 ±0.3 cm³/m³, hydrogen sulfide (H₂S) 1 ±0.3 cm³/m³, at 25°C and 75% humidity and exposure of four days

Free from substances that could impair the application of coating

In acc. with VW specification

Conformance with EMC directives	IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
		IEC 61000-4-3 (immunity to radiated interference) Criterion A
		IEC 61000-4-4 (burst) Criterion A
		IEC 61000-4-5 (surge) Criterion B
		IEC 61000-4-6 (immunity to conducted interference) Criterion A
		IEC 61000-4-8 (immunity to magnetic fields) Criterion A
		EN 55022 (emitted interference) Criterion A
Noise immunity	EN 61000-6-2:2005
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 61000-6-4