FL NAT 2008 - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 2702881

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Managed NAT Switch 2000, 8 RJ45 ports 10/100 Mbps, PROFINET Conformance-Class A, 1:1-NAT, Virtual NAT, IP-Masquerading

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Width	45 mm
Height	130 mm
Depth	115 mm

General

Support by phone or on-site (fee is charged)

Housing material

Polycarbonate fiber reinforced

Mounting type

DIN rail mounting

Ethernet (RJ45)
Connection method	RJ45
Note on the connection method	Auto negotiation and autocrossing
Transmission speed	10/100 Mbps
Transmission physics	Copper
Transmission length	100 m (per segment)
Signal LEDs	Data receive, link status
No. of channels	8 (RJ45 ports)

Type	Book type
Product type	Switch
Product family	Managed NAT Switch 2000
MTTF	507.8 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		246.55 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		56.66 Years (SN 29500 standard, temperature 55°C, operating cycle 100%)
Special properties	1:1-NAT, Virtual NAT, IP-Masquerading
Signal delay	≥ 6.5 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size)
Insulation characteristics
Protection class	III (VDE 0106)
Switch functions
Diagnostic functions	RMON History
		LLDP (Link Layer Discovery Protocol)
		SNMP-Traps
		N:1-Portmirroring
		ACD (Address Conflict Detection)
		SysLog
		CRC-Surveillance
Basic functions	Router for standard routing, NAT, 1:1-NAT and port forwarding
NAT functions	1:1-NAT
		Virtual-NAT
		IP-Masquerading
		Port forwarding
PROFINET conformance class	Conformance-Class A
Filter functions	Quality of Service (8 priority classes)
		Class of Service
		DiffServ/DSCP
		Port-Priorisierung
		VLAN (up to 8 VLANs)
		IGMP Snooping/Querier (v1/v2)
		Auto-Query-Port
		Extended Multicast Filtering
IP parameterization	DHCP-Client
		DHCP server (port based)
		BootP
MAC address table	8k
Management	Web-based management (HTTP/HTTPS)
		Role-based user management (LDAP, RADIUS)
		SNMPv1/v2/v3
		Command-line interface (Telnet, SSH)
Redundancy	MRP (Media Redundancy Protocol)
Redundancy		RSTP (Rapid Spanning Tree Protocol)
Status and diagnostic indicators	LEDs: US (power supply), 2 LEDs per Ethernet port (Link/Activity and Speed)
Time synchronization	SNTP (Simple Network Time Protocol)
Security functions
Basic functions	Router for standard routing, NAT, 1:1-NAT and port forwarding

Local diagnostics	US Supply voltage Green LED
		LNK/ACT Link status Green LED
		SPD Data transmission speed Green LED
Maximum power dissipation for nominal condition	4.86 W (At U_S = 18 V DC and 60°C ambient temperature)
Test voltage	500 V DC
Test section	for one minute 500 V DC
Transmission medium	Copper
Supply
Supply voltage (DC)	24 V DC (single)
Supply voltage range	18 V DC ... 32 V DC
Power supply connection	via COMBICON, max. conductor cross section 1.5 mm²
Residual ripple	3.6 V_PP (within the permitted voltage range)
Max. current consumption	0.35 A (At U_S = 18 V DC and 60°C ambient temperature)
Typical current consumption	180 mA (at U_S = 24 V DC and 25 °C ambient temperature)
Current consumption	180 mA

Connection method	Screw connection
Note on the connection method	Use only copper connecting cables providing the permitted temperature range (-40 °C ... 75 °C).
Conductor cross section, rigid	0.08 mm² ... 1.5 mm²
Conductor cross section, flexible	0.08 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16
Stripping length	7 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	0 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	10 % ... 95 % (non-condensing)
Shock (operation)	30g (EN 60068-2-27)
Vibration (operation)	2g, according to IEC 60068-2-6
Air pressure (operation)	86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport)	86 kPa ... 108 kPa

Free from substances that could impair the application of coating

Yes

Conformity/Approvals
UL, USA	UL 61010-1, Ed.3 / UL 61010-2-201, Ed.1
UL, Canada	CSA C22.2 NO.61010-2-201:14, Ed.1 / CSA C22.2 NO.61010-1-12, Ed.3

Conformance with EMC directives	EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
		EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
		EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
		EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
		EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
		EN 61000-6-2 EN 61000-6-4 (interference) Class A
		EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 61000-6-4