FB-DIAG/FF/LI - Device coupler Phoenix Contact

Mã sản phẩm: 2316284

Field diagnostics module, legacy installation, includes pluggable side connector

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type

Device coupler

Supply
Supply voltage range	9 V DC ... 32 V DC
Typical current consumption	27 mA
Max. current consumption	29 mA

Signal	PROFIBUS
Signal		FOUNDATION Fieldbus
Data: FOUNDATION Fieldbus
Connection method	Pluggable screw connection with test points
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24

Color	green
Flammability rating according to UL 94	V0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	95 % (non-condensing)

Conformity/Approvals
Conformance	IEC 61158-2
Fieldbus Foundation	FF-830
EN	EN 61326, EN 60068-2-27, EN 60068-2-6
NE	NE21
Ex data
ATEX	Sira 13ATEX4149X;  II 3G Ex nA [ic] IIC T4 Gc
IECEx	IECEx SIR 13.0060X; Ex nA [ic] IIC T4 Gc
CSA, USA/Canada	Class I, Div. 2, Groups A,B,C,D; Ex nA nL IIC T4 Gc Class I, Zone 2, AEx nA nC IIC T4 Gc

Standards/regulations
Standards/regulations	Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations
Standards/regulations	Dry heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Damp heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Shock and vibration in acc. with EN 61131-2 and EN 50178
Standards/regulations	IEC 61158-2