FB-8SP ISO - Device coupler Phoenix Contact

Mã sản phẩm: 2316311

Zone 1 installed device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for eight spurs connected to fieldbus end devices.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Device coupler
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Supply
Supply voltage range	16 V DC ... 32 V DC (input on trunk line side)
Max. current consumption	35 mA (trunk, no load)
Max. current consumption		350 mA (maximum trunk current)

Supply
Conductor cross section, flexible	2.50 mm² ... 0.20 mm²
Conductor cross section, rigid	2.50 mm² ... 0.20 mm²
Conductor cross section, flexible [AWG]	24 ... 12
Conductor cross section AWG	24 ... 12

Safety data
Input voltage U_i	32 V
Inductance Li	0 µH
Capacitance Ci	0 µF
Max. output voltage U_o	16.7 V
Max. output current I_o	250 mA
Max. output power P_o	1.05 W
Safety-related maximum voltage U_m	253 V
IIC: Max. external inductivity L_o / Max. external capacitance C_o	/ 0.39 µF
IIB: Max. external inductivity L_o / Max. external capacitance C_o	/ 2.33 µF
IIC: Max. external inductivity L_o / Max. external capacitance C_o	0.56 mH
IIB: Max. external inductivity L_o / Max. external capacitance C_o	2.27 mH

Signal	FOUNDATION Fieldbus
Signal		PROFIBUS
Data: Foundation Fieldbus and PROFIBUS PA Segment
Connection method	Pluggable COMBICON screw connection for each spur
No. of channels	8
Termination resistor	Integrated termination, activated with bridge located in correct terminals
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24
Output nominal voltage	≤ 14 V (each spur)
Output current	35 mA (per spur)

Flammability rating according to UL 94

Cable impedance

Recommend Type A fieldbus cable

Ambient conditions
Degree of protection	IP20
Degree of protection		IP30 (over trunk connections)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	< 95 % (non-condensing)
Permissible humidity (operation)	95 % (non-condensing)
Shock	15g for 11 ms
Vibration (operation)	2g, 10 Hz ... 150 Hz

ATEX
Identification	II 2(1) G Ex eb ib mb [ia Ga] IIC T4 Gb II (1D) [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	DEMKO 16ATEX 1689X
IECEx
Identification	Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	IECEx UL 16.0114X
UKCA Ex (UKEX)
Identification	II 2(1) G Ex eb ib mb [ia Ga] IIC T4 Gb II (1D) [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	UL21UKEX2210X
CCC Ex
Identification	Ex e ib mb [ia Ga] IIC T4 Gb [Ex iaD]
Certificate	2022122310115622
Ex data
UL, USA / Canada	Install in Class I, Div. 2, Groups A, B, C, D Entity/FISCO spur to: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; Group IIIC Class I, Zone 1 AEx eb ib mb [ia Ga] IIC T4 Gb [AEx ia Da] IIIC FISCO power supply (spur) Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC FISCO power supply (spur)

Standards/regulations
Standards/regulations	Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations
Standards/regulations	Dry heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Damp heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Shock and vibration in acc. with EN 61131-2 and EN 50178
Standards/regulations	IEC 61158-2