FB-8SP - Device coupler Phoenix Contact

Mã sản phẩm: 1026043

Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for eight spurs connected to fieldbus end devices.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Device coupler
MTTF	723 Years (25 degrees C)

Supply
Supply voltage range	10.6 V DC ... 32 V DC (input on trunk line side)
Typical current consumption	6.5 mA

Supply
Conductor cross section, flexible	2.50 mm² ... 0.20 mm²
Conductor cross section, rigid	2.50 mm² ... 0.20 mm²
Conductor cross section, flexible [AWG]	24 ... 12
Conductor cross section AWG	24 ... 12

Safety data
Input voltage U_i	32 V (IIB (C/D))
		24 V (IIC (A/B))
		17.5 V (FISCO)
Inductance Li	4 µH
Capacitance Ci	0 µF
Max. output voltage U_o	U_in (spur)
Max. output current I_o	56 mA (spur)
Max. output power P_o	1.792 W
Current consumption	6.5 mA (Maximum, no load)
Current consumption		0.46 A (maximum trunk current)
IIC/IIB (spur): Max. external inductivity L_o / Max. external capacitance C_o	/ 80 nF
		0.26 mH

Signal	FOUNDATION Fieldbus
Signal		PROFIBUS
Data: Foundation Fieldbus and PROFIBUS PA Segment
Connection method	Pluggable COMBICON screw connection for each spur
No. of channels	8
Termination resistor	100 Ω, external removable plug included
Termination resistor		100 Ω (external removable plug)
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24
Output nominal voltage	≤ 32 V (each spur)
Output current	38 mA

Flammability rating according to UL 94

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-50 °C ... 90 °C
Ambient temperature (storage/transport)	-50 °C ... 90 °C
Altitude	2000 m
Max. permissible relative humidity (operation)	< 95 % (non-condensing)
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	non-condensing
Shock	30g, 11 ms
Vibration (operation)	5g, 10 Hz ... 150 Hz

Conformity/Approvals
Conformance	CE-compliant, additionally EN 61326
UL, USA	ANSI/UL 61010-1
Fieldbus Foundation	FF-846
EN	EN 61326, EN 60068-2-27, EN 60068-2-6
NE	NE21
Ex data
ATEX	Sira 13ATEX4247X;  II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs Ex nA [nL] IIC T4 Gc;  II 3G Ex ic IIC T4 Gc, FISCO ic
IECEx	IECEx SIR 13.0089X; Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs; Ex nA [nL] IIC T4 Gc; Ex ic IIC T4 Gc, FISCO ic
UL, USA	Class I, Zone 2; AEx nA[ic] IIC T4, Entity/FISCO spurs Class I, Div. 2, Groups A, B, C, D; T4
CSA, USA/Canada	Class I, Div. 2, Groups A, B, C, D; Ex nA [nL] IIC T4; Class I, Zone 2, AEx nA [nC] IIC T4

Standards
Standards/regulations	EN 60079-0:2011; EN 60079-11:2012; EN 60079-15:2005; EN 60079-15:2010
		IEC 60079-0:2011; IEC 60079-11:2011; IEC 60079-15:2005; IEC 60079-15:2010
Standards/regulations
Standards/regulations	Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations
Standards/regulations	Dry heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Damp heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Shock and vibration in acc. with EN 61131-2 and EN 50178
Standards/regulations	IEC 61158-2