FB-2SP/24DC - Device coupler Phoenix Contact

Mã sản phẩm: 2316352

Foundation Fieldbus isolator for Zone 2 installation using the intrinsically safe [ic] protection method.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type

Device coupler

Supply
Supply voltage range	9 V DC ... 30 V DC

Supply
Conductor cross section, flexible	2.50 mm² ... 0.20 mm²
Conductor cross section, rigid	2.50 mm² ... 0.20 mm²
Conductor cross section, flexible [AWG]	24 ... 12
Conductor cross section AWG	24 ... 12

Safety data
Inductance Li	4 µH (spurs)
Capacitance Ci	0 nF (spurs)
Max. output voltage U_o	23.56 V DC (spurs)
Max. output current I_o	40.9 mA (spurs)
Max. output power P_o	0.964 W (spurs)
Max. external inductivity L_o / Max. external capacitance C_o	/ 60 nF
		250 µH

Signal	PROFIBUS
Signal		FOUNDATION Fieldbus
Data: Foundation Fieldbus and PROFIBUS PA Segment
Connection method	Pluggable COMBICON screw connection for each spur
No. of channels	2
Tightening torque	0.5 Nm ... 0.6 Nm
Termination resistor	via FB-ET/E
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24
Output nominal voltage	≤ 32 V (each spur)
Maximum output current	35 mA (per channel)
Maximum output current		50 mA (per module)

Color

green

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Shock	15g, 11 ms
Vibration (operation)	1g, 10 Hz ... 150 Hz

Conformity/Approvals
IEC	IEC 60079-0:2011; IEC 60079-11:2011; IEC 60079-15:2010
Fieldbus Foundation	FF-846
EN	EN 60079-0:2011; EN 60079-11:2011; EN 60079-15:2010
NE	NAMUR NE 21
Ex data
ATEX	Sira 13ATEX4016; II 3(3)G Ex nA [ic] IIC T4 Gc
IECEx	IECEx SIR 13.0001X; Ex nA [ic] IIC T4 Gc
CSA, USA/Canada	Class I, Div. 2, Groups A, B, C, D; Ex nA[ic] IIC T4 Gc Class I, Zone 2; AEx nA[ic] IIC T4 Gc

Standards/regulations
Standards/regulations	Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations
Standards/regulations	Dry heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Damp heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Shock and vibration in acc. with EN 61131-2 and EN 50178
Standards/regulations	IEC 61158-2

Mounting type	DIN rail mounting
Assembly instructions	on standard DIN rail NS 35 in accordance with EN 60715
Mounting position	On horizontal DIN rail NS 35 in acc. with EN 60715