FB-12SP ISO - Device coupler Phoenix Contact

Mã sản phẩm: 2316312

Zone 1 installed device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for 12 spurs connected to fieldbus end devices.

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	Device coupler
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Supply
Supply voltage range	16 V DC ... 32 V DC (input on trunk line side)
Max. current consumption	50 mA (trunk, no load)
Max. current consumption		550 mA (maximum trunk current)

Supply
Conductor cross section, flexible	2.50 mm² ... 0.20 mm²
Conductor cross section, rigid	2.50 mm² ... 0.20 mm²
Conductor cross section, flexible [AWG]	24 ... 12
Conductor cross section AWG	24 ... 12

Safety data
Input voltage U_i	32 V
Inductance Li	0 µH
Capacitance Ci	0 µF
Max. output voltage U_o	16.7 V
Max. output current I_o	250 mA
Max. output power P_o	1.05 W
Safety-related maximum voltage U_m	253 V
IIC: Max. external inductivity L_o / Max. external capacitance C_o	/ 0.39 µF
IIB: Max. external inductivity L_o / Max. external capacitance C_o	/ 2.33 µF
IIC: Max. external inductivity L_o / Max. external capacitance C_o	0.56 mH
IIB: Max. external inductivity L_o / Max. external capacitance C_o	2.27 mH

Signal	FOUNDATION Fieldbus
Signal		PROFIBUS
Data: Foundation Fieldbus and PROFIBUS PA Segment
Connection method	Pluggable COMBICON screw connection for each spur
No. of channels	12
Termination resistor	Integrated termination, activated with bridge located in correct terminals
Conductor cross section flexible max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	12
Conductor cross section AWG min.	24
Output nominal voltage	≤ 14 V (each spur)
Output current	35 mA (per spur)

Flammability rating according to UL 94

Cable impedance

Recommend Type A fieldbus cable

Ambient conditions
Degree of protection	IP20
Degree of protection		IP30 (over trunk connections)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	< 95 % (non-condensing)
Permissible humidity (operation)	95 % (non-condensing)
Shock	15g for 11 ms
Vibration (operation)	2g, 10 Hz ... 150 Hz

ATEX
Identification	II 2(1) G Ex eb ib mb [ia Ga] IIC T4 Gb II (1D) [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	DEMKO 16ATEX 1689X
IECEx
Identification	Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	IECEx UL 16.0114X
UKCA Ex (UKEX)
Identification	II 2(1) G Ex eb ib mb [ia Ga] IIC T4 Gb II (1D) [Ex ia Da] IIIC FISCO power supply (spur)
Certificate	UL21UKEX2210X
CCC Ex
Identification	Ex e ib mb [ia Ga] IIC T4 Gb [Ex iaD]
Certificate	2022122310115622
Ex data
UL, USA / Canada	Install in Class I, Div. 2, Groups A, B, C, D Entity/FISCO spur to: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; Group IIIC Class I, Zone 1 AEx eb ib mb [ia Ga] IIC T4 Gb [AEx ia Da] IIIC FISCO power supply (spur) Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC FISCO power supply (spur)

Standards/regulations
Standards/regulations	Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations
Standards/regulations	Dry heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Damp heat in acc. with IEC 61131-2
Standards/regulations
Standards/regulations	Shock and vibration in acc. with EN 61131-2 and EN 50178
Standards/regulations	IEC 61158-2