EV-CC-AC1-M3-RCM-ETH-XP - AC charging controller Phoenix Contact

Mã sản phẩm: 1139449

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

AC charging controller in accordance with IEC 61851-1, client or standalone, OCPP 1.6J via Ethernet, Modbus/TCP via Ethernet, connection of RFID reader and energy meter via RS-485, DC residual current monitoring, connector release in the event of power failure

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	AC charging controller
Product family	CHARX control advanced plus
Application	AC charging controller for private and commercial applications (EU/CN)
Operating mode	Stand-Alone
		Client
		Server
Charging mode	Mode 3, Case B + C
Insulation characteristics
Overvoltage category	II

Charging controllers
Number of charging points	1

Type of charging current	AC
Current consumption	< 3 W (No-load)
Power consumption	< 10 W
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Measuring current transducer
Connection method	Connector
Diameter of measuring coil	15 mm
Measuring range: Residual current
Rated frequency f_n	≤ 2000 Hz
Nominal differential current	± 300 mA
Residual current I_Δn	30 mA (AC)
Residual current I_Δn		6 mA (DC)
Rated current I_n	32 A (Three-phase, 4x6 mm²)
Rated current I_n		48 A (Single-phase)
Tripping time for I_Δn	< 180 ms
Response time for 2 x I_Δn	< 70 ms
Tripping time for 5xI_Δn	< 20 ms
Supply
Supply voltage	230 V
Supply voltage range	100 V AC ... 240 V AC (nominal voltage range)
Nominal power consumption	< 3 W (No-load)
Power consumption	< 10 W (maximum)
Frequency range	50 Hz ... 60 Hz

Digital
Number of digital inputs	5
Description of the input	Digital input
Nominal current I_N	≤ 4 mA
Nominal input voltage U_N	12 V
Input voltage range	0 V ... 3 V (Off)
Input voltage range U2	9 V ... 15 V (On)

Digital
Output name	4 digital outputs
Connection technology	Screw connection
Maximum output voltage	30 V
Maximum output current	0.2 A (Total current for all outputs; internally supplied)
Maximum output current per channel	0.6 A (Per output; externally supplied)
Switching
Output name	Relay output C_1.2
Minimum switching capacity	4000 VA
Maximum switching voltage	250 V AC (External supply)
Max. switching current	16 A
Switching
Output name	Motor switching output
Maximum switching voltage	12 V (Internal supply)
Max. switching current	1 A (maximum)

Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1 mm²
Conductor cross section AWG	26 ... 16

Interface	Ethernet (1x)
RS-485
Interface	RS-485 2-wire
Bus system	RS-485
Connection method	Screw connection
Number of interfaces	1 (for energy measurement device and RFID reader)
Number of supported devices	2
Transmission speed range	4.8 kbps ... 115.2 kbps (adjustable)
Protocols supported	Modbus/RTU (Master)
Ethernet
Interface	Ethernet
Connection method	RJ45 jack
Number of interfaces	1
Serial transmission speed	10/100 Mbps
Transmission length	100 m
Protocols supported	Modbus/TCP
Protocols supported		OCPP 1.6J

Status display

5x LEDs

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	< 2000 m
Permissible humidity (operation)	30 % ... 95 % (non-condensing)

Conformity/Approvals
Conformance	CE-compliant

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Noise immunity	EN 61000-6-2
Immunity to the discharge of static electricity	EN 61000-4-2: 8 kV air, 4 kV contact discharge
Immunity to electromagnetic fields	EN 61 000-4-3, 80---1000 MHz, 10 V/m
Immunity to conducted high frequency	EN 61 000-4-6, 0.15...80 MHz, 10 V
Immunity to fast transients (Burst)	EN 61 000-4-4: 2 kV AC mains input, 1 kV data cable
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Housing	DIN 43880
Noise emission	EN 61000-6-3