EM-CP-PP-ETH - AC charging controller Phoenix Contact

Mã sản phẩm: 2902802

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

Product type	AC charging controller
Product family	CHARX control advanced
Application	AC charging controller for commercial applications (EU)
Operating mode	Stand-Alone
Operating mode		Client
Charging standard	Type 2
Charging mode	Mode 3, Case B + C

Charging controllers
Number of charging points	1

Type of charging current	AC 3-phase
Current consumption	< 1 W
Locking release in the event of mains failure	With EM-EV-CLR-12V locking release module (Item No. 2903246) as an option
Supply
Supply voltage	230 V
Supply voltage range	110 V AC ... 240 V AC (nominal voltage range)
Supply voltage range		95 V AC ... 264 V AC
Max. current consumption	40 mA
Nominal power consumption	< 1 W (No-load)
Frequency range	45 Hz ... 65 Hz

Digital
Number of digital inputs	4
Frequency range	50 Hz ... 60 Hz
Nominal current I_N	≤ 8 mA
Nominal input voltage U_N	24 V
Input voltage range U1	-3 V ... 5 V (Off)
Input voltage range U2	15 V ... 30 V (On)

Digital
Output name	4 digital outputs
Connection technology	Screw connection
Maximum output voltage	30 V
Maximum output current	0.2 A (Total current for all outputs; internally supplied)
Maximum output current per channel	0.6 A (Per output; externally supplied)
Digital
Output name	Relay output V_1.2
Maximum switching voltage	250 V AC
Max. switching current	2 A
Switching
Output name	Relay output C_1.2
Minimum switching capacity	1500 VA
Maximum switching voltage	250 V AC (External supply)
Max. switching current	2 A
Switching
Output name	Relay output R_1.3 and R_2.4
Minimum switching capacity	180 VA
Maximum switching voltage	30 V AC/DC (External supply)
Max. switching current	2 A

Conductor connection
Connection method	Screw connection
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Interface	Ethernet (1x)
RS-485
Interface	RS-485 2-wire
Bus system	RS-485
Connection method	Screw connection
Number of interfaces	1
Number of supported devices	1
Transmission speed	9.6 kbps (Standard)
Transmission speed range	2.4 kbps ... 19.2 kbps (adjustable)
Data flow control/protocols	Modbus/RTU (slave)
Ethernet
Interface	Ethernet
Bus system	RJ45
Connection method	RJ45 jack
Number of interfaces	1
Serial transmission speed	10/100 Mbps
Transmission length	max. 100 m (with shielded, twisted-pair data cable)
Protocols supported	Modbus/TCP

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Permissible humidity (operation)	30 % ... 95 % (non-condensing)

Conformity/Approvals
Conformance	CE-compliant

Low Voltage Directive	Conformance with LV directive 2006/95/EC
Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2004/108/EC
Housing	DIN 43880
Noise emission	EN 61000-6-3